User manual JVC LT-20E50SU

[. . . ] ENGLISH DEUTSCH FRANAIS ITALIANO LT-20E50SU LCD PANEL TV LCD-TV-GERT PANNEAU LCD TELEVISEUR TV A SCHERMO LCD INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS ISTRUZIONI 50058427 2004 VICTOR COMPANY OF JAPAN, LIMITED 1004MKH-VT-VT Contents For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 For your safety This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. They are of a general nature, intended to help you with all your electronic consumer products and some points may not apply to the goods you have just purchased. Some DOs and DONTs for you Air Circulation Leave at least 10cm clearance around the television to allow adequate ventilation. This will prevent the TV from overheating and consequential possible damage to the TV. [. . . ] When Off is selected, there will be no difference in the operation of your TV. When On is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons except / I button on the right side of the TV will not work. These modes can be chosen by pressing or button on EXT-2 Output. Feature Menu Press MENU button, now you are in mainmenu. Then enter the Feature menu pressing / or OK button. Blue Back (During No Signal) The Blue Back Feature can be set by button to either On or Off. To Store Settings Sleep Timer The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item. The timer can be programmed between Off and 120 minutes in steps of 10 minutes. , 120) If sleep timer is activated, at the end of the selected the time, the TV goes automatically to stand-by mode. Child Lock You can use this feature to prevent children turning on/off TV or changing programmes or adjustments etc. Then enter the Install ing menu pressing / or OK button. In EXT mode, Install menu appears like this: Decoder(EXT-2) You can use this mode to connect any decoder to your TV. You can change only Colour system and VCR. To select programme number, you can use / button or Digit Buttons Selecting Band Band, can be chosen either, C or S by or button. Selecting Channel Channel can be changed by or button or by Digit Buttons. Selecting Colour System Using or button on Colour System, you can change the colour system to PAL, SECAM or Auto. Note: In EXT mode, you can choose NTSC 3. 58 and NTSC 4. 43 as well) Selecting Sound System Using or button on Sound System, you can change the standard to BG, DK, I, L, Lp. Selecting Fine Tuning You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy about the image on the screen. Use or button on Fine Tuning item, until getting the best image on the screen. Selecting Search To start the search process, press button for forward search or button for backward search. If a signal is found or reaches to end of the band after searching, press or buttons to continue search process. To stop the search process when you want, press or buttons at any time. Press the or buttons to set it On or Off. When you select Decoder(EXT-2) On, EXT-2 output will be chosen as TV mode only and any scrambled channels will be unscrambled through decoder connected your TV via EXT-2 output. Setting VCR (Video Cassette Recorder ) Mode This item can be seen in TV, EXT-1, EXT-2, EXT-3 and EXT-4 modes. If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode on. [. . . ] When your decoder has a Euroconnector / RCA Jack you can obtain better picture quality if you connect a eurocable (RCA Jack Cable) to EXTERNAL (RCA Jack). Connect the decoder to the video recorder Some video recorders have a special euroconnector for decoder. Connect a eurocable to the euroconnector of your decoder and to the special euroconnector of your video recorder. To connect your video recorder to the TV, see TV and Video Recorder section. If you want to connect more equipment to your TV, consult your dealer. Connecting Headphones Use the stereo headphone socket on the right side of your TV, to connect headphones. Connecting the PC Connect PC monitor with 15-pin PC cable to the 15-pin connector on the rear of the computer. [. . . ]