User manual JVC KW-XR411

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. If you need to operate the unit while driving, be sure to look around carefully or you may be involved in a traffic accident. [. . . ] ⷠDo not recharge, short, disassemble, heat the battery, or dispose of it in a fire. ⷠDo not leave the battery with other metallic materials. ⷠDo not poke the battery with tweezers or similar tools. ⷠWrap the battery with tape and insulate when throwing away or saving it. Storing your own sound mode You can store your own adjustments in memory. FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode. : Display demonstration will be activated automatically if no operation is done for about 20 seconds. Pressing DISP for more than one second can scroll the display regardless of the setting. : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received). ) : When the currently received signals become weak, the unit switches to another station broadcasting the same programme. ) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. : Boost low and high frequencies to produce a well-balanced sound at a low volume level. VOL ADJ ­05 -- : Preset the volume adjustment level of VOL ADJ +05 each source (except FM), compared to the [ VOL ADJ 00 ] FM volume level. The volume level will automatically increase or decrease when you change the source. ⷠBefore making an adjustment, select the source you want to adjust. *6 If you are using a two-speaker system, set the fader level to "00. LOW POWER : Select either one which mutes the sounds while using a mobile phone. : VOLUME 00 ­ VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. *9 The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level set higher than "VOLUME 30. " *10 Displayed only when any source other than "AM" is selected. *11 Displayed only when any source other than "AUX IN" is selected. More about this unit If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. [. . . ] Make sure the unit is not muted/paused ( · Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit ( 3). If "PROTECT" does not disappear, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. Finalize the CD-R/CD-RW with the component which you used for recording. Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. [. . . ]