User manual JVC KW-V40BTE

[. . . ] The marking of products using lasers The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. How to read this manual: • Illustrations of KW-V40BT are mainly used for explanation. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. [. . . ] € The operation buttons, indications and information displayed on the screen differ depending on the connected device. Playback information 1 The device status/battery capacity (only when the information is acquired from the device) 2 Playback mode (See the right column. *1 4 Playing time*1 5 Playback status (I: play/W: pause)*1 6 Tag data (current track title/artist name/album title)*1 • Touching the information bar scrolls the text if not all of the text is shown. 7 Type of the connected Bluetooth device (Page 25) 32 KW-V_Entry_E. Indb 32 2013/10/30 17:11 SETTINGS Sound adjustment Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. € DVD/DVD-VR/VCD – CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV • You cannot adjust the sound when the AV source is turned off. Storing your own adjustment—Customizing preset sound mode 1 Display the <Equalizer> screen. ) 2 Adjust the level of each band (1), then select the subwoofer level (2). On the source control screen: The adjustments are stored and <User> is activated. Storing your own adjustment—Adjusting the sound precisely The adjustments are overwritten if the <User> setting has been created (see the left column), and <User> is activated. Indb 37 2013/10/30 17:11 SETTINGS Clearing your settings On the <HOME> screen: 1 Display the <User Profile> screen. (Page 37) 2 • If the update has failed, turn the power off and then on, and retry the update. € Even if you have turned off the power during the update, you can restart the update after the power is turned on. Adjusting the touch position You can adjust the touch position on the touch panel if the position touched and the operation performed do not match. 3 Updating the system You can update the system by connecting a USB device containing an update file. 2 Touch the center of the marks at the lower left and at the upper right as instructed. 1 Create an update file, copy it to a USB device, and connect it to the unit. 2 Display the <System Information> • To reset the touch position, press [Reset]. Indb 38 2013/10/30 17:11 SETTINGS Setting menu items Displaying the <Settings> menu screen <Audio> setting screen <Fader/Balance> <Loudness> You can activate/deactivate loudness. € On (Initial): Boost low and high frequencies to produce a well-balanced sound at a low volume level. (Page 34) <Volume Adjust> Adjust and store the auto-adjustment volume level for each source. [. . . ] Spécifications Section du moniteur Taille de l’image (L × H) KW-V40BT : Écran large de 6, 95 pouces (diagonal) 156, 6 mm x 81, 6 mm KW-V20BT/KW-V10 : écran large de 6, 1 pouces (diagonal) 136, 2 mm x 72 mm Système d'affichage Panneau LCD TN transparent Système d'entraînement Système à matrice active TFT Nombre de pixels 1 152 000 (800H × 480V × RVB) Pixels effectifs 99, 99% Disposition des pixels Disposition rayée RVB Rétroéclairage Diode DEL Section du lecteur de DVD Convertisseur D/A 24 bit Décodeur audio Linear PCM/Dolby Digital/MP3/ WMA/WAV Décodeur vidéo MPEG1/MPEG2/DivX/JPEG Pleurage et scintillement Non mesurables Réponse en fréquence Échantillonnage 96 kHz : 20 Hz – 22 000 Hz Échantillonnage 48 kHz : 20 Hz – 22 000 Hz Échantillonnage 44, 1 kHz : 20 Hz – 20 000 Hz Distorsion harmonique totale 0, 010% (1 kHz) 56 KW-V_Entry_E_FR. € “Made for iPod, ” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance. [. . . ]