User manual JVC KW-NT50HDT

[. . . ] If you wish to dispose of this product and the battery, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead. The monitor built in this unit has been produced with high precision, but it may have some ineffective dots. [. . . ] ( page 65) To change the PTY code for PTY Standby Reception, repeat the above procedure. When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same programme with stronger signals. Usually when you select preset stations, the preset station is tuned in. If the signals from the FM Radio Data System preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another station broadcasting the same programme as the original preset station is broadcasting. When shipped from the factory, Network-Tracking Reception is activated. The unit takes some time to tune in to another station using programme search. The programme may differ from the one currently received (the AF indicator lights up). Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. If " " appears on the screen, the unit cannot accept the operation you have tried to do. In some cases, without showing " , " operations will not be accepted. Select the monitor type to watch a wide screen picture on the external monitor. When you select <16:9> for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. Even if <4:3PS> is selected, the screen size may become <4:3LB> for some discs. You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. select the signal format emitted through the DIGITAL OUT (optical) terminal. ( also page 71) Stream : Select this when connecting an amplifier or a decoder compatible with Dolby Digital or MPEG Audio. Dolby D : Select this when connecting an amplifier or a decoder compatible with Dolby Digital. PCM : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital or MPEG Audio, or when connecting to a recording device. Once you have played back a file with which the Registration Code recorded, this unit's Registration Code is overwritten for copyright protection. This unit can play the MP3/WMA files stored in SD card/USB mass storage class device. All tracks in the SD card/USB device will be played repeatedly until you change the source. [. . . ] Select another destination/via point where is nearer to the current position. A POI found using <POI Name> in the <Destination Menu> is not within the selected city. The current position displayed on the map remains wrong for more than 30 minutes. The distance and estimated time in the guidance are inaccurate after replacing/ rotating the tyres. [. . . ]