User manual JVC KW-AVX830

[. . . ] Only for KW-AVX830: To use the Bluetooth function, insert the Bluetooth adapter (KS-UBT1). Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that the product and the battery with this symbol should not be disposed as general household waste at its end-of-life. [. . . ] Refer to pages i and ii at the end of manual to check the countries where may use the Bluetooth® function. This unit supports the following Bluetooth profiles; · This port is designed for the use with KSUBT1 only. ( 6) The monitor panel closes automatically if no operation is done for about a minute. Keep the Bluetooth adapter inserted when using the Bluetooth function. Connecting a new Bluetooth device for the first time When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. To make pairing, you may need to enter the PIN (Personal Identification Number) code of your Bluetooth device you want to connect. Once the connection is established, it is registered in the unit even if you reset the unit. Only one device for Bluetooth phone and one for Bluetooth audio can be connected at a time. To use the Bluetooth function, you need to turn on Bluetooth function of the device. Enter the same PIN code (as entered in the above step) on the device to be connected. Now connection is established and you can use the device through the unit. Use <Phone Connect>/ <Audio Connect> (or activate <Auto Connect>, 43) to connect the same device from next time. Select desired operation, then select the registered device you want to connect/ disconnect. Using the Bluetooth mobile phone/audio player Signal strength/Battery remainder (only when the information comes from the device). If the screen is turned off, it will turn on again when a call/SMS comes in. Switches the connection to the other registered mobile phone*4 connected with <Phone Connect> ( 43). "No Name" appears when the Tag data is not recorded or when the device does not support the function. (The mobile phone last connected has priority if three or more phones are found. ) If you have registered 3 or more mobile phones and cannot switch to the phone you want to use, connect it with <Phone Connect> ( 43). If the mobile phone is compatible with SMS (Short Message Service), the unit tells you a message has been received. 43) ( · You can adjust the phone volume and the microphone volume. To read a received message, operate the mobile phone after stopping the car in a safe place. [. . . ] The lighting sensor may malfunction when there is an object close to the Prox. Record the tracks using a compliant application on the appropriate discs. Playback order may differ from the one played back using other players. Playback order may differ from the one played back using other players. [. . . ]