User manual JVC KD-X320BT

[. . . ] Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead. Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan EU Representative’s: JVC Technical Services Europe GmbH Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany Déclaration de conformité vis à vis de la Directive 1999/5/CE de R&TTE Déclaration de conformité se rapportant à la directive EMC 2004/108/EC Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU Fabricant: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan Représentants dans l’UE: JVC Technical Services Europe GmbH Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany i JS_JVC_KD_X320BT_E_C_00. Indd i 3/9/2014 4:36:22 PM Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) English Hereby, JVC KENWOOD declares that this unit KD-X320BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. [. . . ] € If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the unit when pairing. Indd 11 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 11 18/9/2014 11:49:48 AM BLUETOOTH® DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). Speak the name of the contact you want to call or the voice command to control the phone functions. (  Make a call using voice recognition) Settings in memory Store a contact in memory You can store up to 6 contacts into the number buttons (1 to 6). 2 Turn the volume knob to select [RECENT CALL], [PHONEBOOK], or [DIAL NUMBER], then press the knob. If a contact is selected, press the volume knob to show the phone number. To erase a contact from the preset memory, select [DIAL NUMBER] in step 2 and store a blank number. VOICE Make a call using voice recognition to activate the connected phone. 1 Press and hold 2 Speak the name of the contact you want to call or the voice command to control the phone functions. € This unit also supports the intelligent personal assistant function of iPhone. 1 Press 2 Turn the volume knob to select [RECENT CALL], then press the knob. 1 Press and hold 2 Turn the volume knob to make a selection (  15), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow 4 Press the instructions stated on the selected item. Operations and display indications may differ according to their availability on the connected device. 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at low volume. SPK-OUT *2 PRE-OUT *3 00 to +06 (+03): Adjusts the output level of the subwoofer connected via speaker lead. (  16) –08 to +08 (00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/ SW) through an external amplifier. ; LOW 55HZ / MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [SUB. €05 — +05 (00): Presets the volume adjustment level of each source (compared to the FM volume level). Indd 15 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 15 28/8/2014 10:48:08 AM AUDIO SETTINGS AMP GAIN LOW POWER: Limits the maximum volume level to 30. [. . . ] € Insulate unconnected wires with vinyl tape to prevent a short circuit. € Be sure to ground this unit to the car’s chassis again after installation. Installing the unit (in-dash mounting) Caution • For safety’s sake, leave wiring and mounting to professionals. Do not touch the metal parts of this unit during and shortly after use of the unit. [. . . ]