User manual JVC KD-SX650

[. . . ] CD RECEIVER KD-SX650 RECEPTOR CON CD KD-SX650 RECEPTEUR CD ATT BAND PROG KD-SX650 DISC FUNC DISC PRESET COMPACT For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l'installation et les raccordements, se référer au manuel séparé. DIGITAL AUDIO For customer Use: Enter below the Model No. FSUN3103-631 [J] INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'INSTRUCTIONS FRANÇAIS ESPAÑOL ENGLISH INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] * Displayed only when one of the following sources is selected -- FM, AM and CD. 2 If "AREA" does not appear, press ¢ or 4 until it appears. "AREA EU" appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM. To reset to the factory setting, follow the above step 1 and 2, then rotate the control dial counterclockwise in step 3 ("AREA US" appears on the display). AREA EU: Select this when used in an area other than North and South America. 9 ENGLISH Other convenient tuner functions CD OPERATIONS ENGLISH Playing a CD 1 0 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. RPT Each time you press RPT (Repeat) while playing a CD, CD repeat play mode turns on and off alternatively. When the repeat mode is turned on, the RPT indicator lights up on the display. Track number of the currently playing track Other convenient CD functions Prohibiting CD ejection You can prohibit the CD ejection and can "lock" a CD in the loading slot. "EJECT" flashes on the display for about 5 seconds, and the CD is "locked. " To cancel the prohibition and "unlock" the CD, press and hold CD and 0 for more than 2 seconds again. "EJECT" appears on the display, and the CD ejects from the loading slot. 12 SOUND ADJUSTMENTS You can adjust the treble/bass sound and the speaker balance. 2 1 Equalization pattern indicator 1 Select the item you want to adjust. Indication BAS (Bass) TRE (Treble) FAD (Fader)* BAL (Balance) VOL (Volume) To do: Adjust the bass Adjust the treble Adjust the front and rear speaker balance Adjust the left and right speaker balance Adjust the volume Range ­6 (min. ) -- +6 (max. ) ­6 (min. ) -- +6 (max. ) R6 (rear only) -- F6 (front only) L6 (left only) -- R6 (right only) 00 (min. ) -- 50 (max. ) Note: * If you are using a two-speaker system, set the fader level to "00. " 2 Adjust the level. Equalization pattern changes as you adjust the bass or treble. Note: Normally the control dial works as the volume control. So you do not have to select "VOL" to adjust the volume level. 13 ENGLISH Adjusting the sound ENGLISH Turning on/off the loudness function The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce well-balanced sound at low volume level. Each time you press LOUD, the loudness function turns on and off alternatively. LOUD @ A 14 You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored each of the following sources -- FM1, FM2, FM3, AM, CD, CD changer and external components. · If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see "Canceling Advanced SCM" on page 17. 1 "Link" indicator and sound mode indicators Equalization pattern indicator 1 SCM Select the sound mode you want. Each time you press the button, the sound mode changes as follows. · If the "Link" indicator is lit on the display (with "SCM LINK" set to "LINK ON" -- see page 17), the selected sound mode can be stored in memory for the current source, and the effect applies to the current source. · If the "Link" indicator is NOT lit on the display (with "SCM LINK" set to "LINK OFF"), the selected sound mode effect applies to any source. Indication SCM OFF BEAT SOFT POP For: Bass (Flat sound) Rock or disco music Quiet background music Light music 00 +2 +1 +4 Preset values Treble 00 00 ­3 +1 Loudness On On Off Off 15 ENGLISH Using the Sound Control Memory ENGLISH Recalling the sound modes 1 1 CD FM/AM Select the source while the "Link" indicator is lit on the display. The "Link" indicator starts flashing, and the sound mode stored in memory for the selected source is recalled. Equalization pattern of the selected sound mode appears. CD-CH Notes: · You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see "Storing your own sound adjustments" on page 18. · To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily, see pages 13 and 14. Your adjustments will be cancelled if another source is selected. 16 You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. [. . . ] Center holder To keep CDs clean A dirty CD may not play correctly. If a CD does becomes dirty, wipe it with a soft cloth in a straight line from center to edge. To play new CDs New CDs may have some rough spots around the inner and outer edges. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. Moisture condensation Moisture may condense on the lens inside the CD player in the following cases: · After starting the heater in the car. In this case, eject the CD and leave the unit turned on for a few hours until the moisture evaporates. [. . . ]