User manual JVC KD-S1501

[. . . ] If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. How to read this manual The following methods are used to made the explanations simple and easy-to-understand: · Some related tips and notes are explained in "More about this receiver" (see page 21). ⷠButton operations are mainly explained with the illustrations as follows: How to use the MODE button If you press MODE, the receiver goes into functions mode, then the number buttons work as different function buttons. [. . . ] (Flat sound) Rock or disco music Classical music Light music Funk or rap music Jazz music You can adjust the sound characteristics to your preference. Boost low and high frequencies to produce a wellbalanced sound at low volume level. *1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including "USER. " *2 If you are using a two-speaker system, set the fader level to "00. " *3 Normally the +/­ buttons work as the volume control. So you do not have to select "VOL" to adjust the volume level. DEMO ON: [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. CLOCK H Hour adjustment CLOCK M Minute adjustment 24H/12H 24 hours or 12 hours time display CLK ADJ Automatic clock setting When the received signals from the current station become weak. AF: [Initial]; Switches to another station (the programme may differ from the one currently received), [12]. Using the AF data, the receiver tunes in to another frequency broadcasting the same programme as the original preset RDS station is if the preset station signals are not sufficient. RED O GREEN [Initial: RED] MUTING 1/MUTING 2: Select either one which mutes the sounds while using the cellular phone. LOW PWR: VOL 00 ­ VOL 30 (Select this if the maximum power of the speaker is less than 45 W to prevent them from damaging the speaker. 19 When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. ⷠDo not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc. [. . . ] Next time you select "CD" for the playback source, disc play starts from where it has been stopped previously. When a disc has been loaded, selecting "CD" for the playback source starts disc play. If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. [. . . ]