User manual JVC KD-R90BT

[. . . ] ENGLISH FRANÇAIS KD-R90BT CD RECEIVER / RÉCEPTEUR CD For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages , référez-vous à la page 4. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. [. . . ] Repeat this procedure until you have adjusted all the three primary colors. If “00” is selected for all the primary colors for <Display Zone>, nothing appears on the display. Changes the display and buttons illumination during menu, list search, and playback mode operations. Night Color/Day Color is changed by turning on/off your car’s headlight. 18 | ENGLISH KD-R90BT_E_EN 2012/2/15 17:53:26 Brightness adjustments 1 2 Brightness adjustments 3 You can select your preferred brightness for <Button Zone>, <Display Zone> separately. (Hold) <Dimmer> <Brightness> <Day Brightness>/ <Night Brightness> Button Zone Display Zone Level 00 to 31 Level 00 to 31 4 Press MENU to exit. Sound adjustments This unit memorizes sound settings adjusted for each individual source. Selecting the preset sound You can select a preset sound mode, for each individual source, suitable for the music genre. 2 <EQ/DSP> <EQ> USER +6 PUSH 50 Hz - - - - - - - - or - - - - - - - Press repeatedly. If SOUND 1/2/3 is selected as the sound mode, “Fix (My Sound)” appears and no settings can be made. NATURAL DYNAMIC VOCAL BASS USER *1 SOUND 1 *2 SOUND 2 *2 SOUND 3 *2 FLAT (back to the beginning) *1 For settings, refer to “Storing your own adjustments” . Storing your own adjustments You can customize the preset sound mode <USER>. The active preset sound mode (FLAT/ NATURAL/DYNAMIC/VOCAL/BASS) will be used as a reference for your customization. 1 (Hold) ENGLISH | 19 KD-R90BT_E_EN 2012/2/15 17:53:26 Sound adjustments Setting “My Sound EQ” My Sound EQ lets you customize the sound through five steps involving different types of musical instruments. Your adjustments are stored in SOUND1/2/3 and can be easily selected via the EQ button. Sound +6 PUSH Step 1 To set “My Sound EQ” with default music 1 (Hold) You can also compare the results with a flat EQ. Optional Music*: Sample music of various genres stored in the connected USB device. Select step (instrument) Adjust the level The adjustments are stored and <SOUND 1/2/3> is activated. To set “My Sound EQ” with Optional music Step 1: Adjust the overall sound level. 5 Follow steps 1 through 6 in “To set “My Sound EQ” with default music” whilst selecting <Optional Music> in step 2. Jms> files in only one of the USB devices if two USB devices are connected at the same time. Result 20 | ENGLISH KD-R90BT_E_EN 2012/2/15 17:53:26 Sound adjustments Setting the speaker output timing — Time Alignment Ideal listening experience is achieved when the distance between each speaker and the listener is the same. [. . . ] Check whether the selected folder, the connected USB device, or the iPod/iPhone contains a playable file. (USB: page 32) (iPod/iPhone: page 29) Ensure that the device contains files in the supported formats. For details on resetting the iPod/iPhone, refer to the instruction manual supplied with the iPod/iPhone. ( page 3) Make sure you have entered the same PIN code to both the unit and Bluetooth device. [. . . ]