User manual JVC KD-R611

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. If you need to operate the unit while driving, be sure to look around carefully or you may be involved in a traffic accident. [. . . ] : Changes the display and buttons (except for EQ/BASS-TRE / DISP ) illumination during menu, list search and playback mode operations. The display will change to the original color when the call is answered or the incoming call stops. When the unit receives a text message, the display only illuminate in blue. : Boost low and high frequencies to produce a well-balanced sound at a low volume level. : Preset the volume adjustment level of each source (except FM), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. *10 If you are using a two-speaker system, set the fader level to "00. MUTING 1/ : Select either one which mutes the sounds MUTING 2 while using a mobile phone. LOW POWER : VOLUME 00 ­ VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. : You can select the playback speed of the "Audiobook" sound file in your iPod. *13 The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level set higher than "VOLUME 30. " *14 Displayed only when any source other than "AM" is selected. *15 Displayed only when any source other than "EXT IN" is selected. *16 Displayed only when any source other than "AUX IN" is selected. *17 Displayed only when an iPod is connected and playback is controlled from the unit. You can select your preferred color for buttons illumination (except for EQ/BASS-TRE / DISP ) and display color separately. Pressing COLOR in step 1 will enter zone selection menu (BUTTON ZONE / DISP ZONE / ALL ZONE) directly. Repeat steps 2 and 3 to select a different zone and your preferred color. If <ALL ZONE> is selected in step 2, the buttons and display illumination changed to the current/selected <BUTTON ZONE> color. You can also change the <ALL ZONE> color to one of your preferred color by performing step 3. ] Select your preferred color from one of the 29 preset colors or <USER> color. Creating your own day and night colors--USER You can create your own colors for <DAY COLOR> and <NIGHT COLOR> to apply to button zone and display zone. [. . . ] The elapsed playing time is not This sometimes occurs during playback. "NOT SUPPORT" appears on the Skip to the next track encoded in an appropriate format display and track skips. This unit can only display letters (upper case), numbers, and a limited number of symbols. "NOT SUPPORT" appears on the Skip to the next track encoded in an appropriate format display and track skips. [. . . ]