User manual JVC KD-R531

[. . . ] ENGLISH FRANÇAIS KD-R531/KD-R432/KD-R431 CD RECEIVER / RÉCEPTEUR CD For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages , référez-vous à la page 4. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. [. . . ] Otherwise, sound may be interrupted or unclear while listening to an external component. Bluetoothா For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. ( Installation/Connection Manual) KS-BTA100 is not available in some countries. Operations may be different depending on the connected Bluetooth device. KS-BTA100 Preparation For details on registering and using the Bluetooth device, refer to the instructions manual supplied with KS-BTA100. 10 | ENGLISH KD-R531_E_EN <SRC SELECT> <R-AUX> <BT ADAPTER> 2011/10/3 19:21:12 Brightness adjustments 1 2 Brightness adjustments You can select your preferred brightness for <BUTTON ZONE>, <DISP ZONE> separately. Sound adjustments Selecting the preset sound You can select a preset sound mode, for each individual source, suitable for the music genre. pro Equalizer 1 (Hold) <PRO EQ> <BASS>**/<MIDDLE>/ <TREBLE> 2 - - - - - - - - or - - - - - - - Press repeatedly. DYNAMIC VOCAL BOOST BASS BOOST USER FLAT NATURAL (back to the beginning) 3 Adjust the sound elements of the selected tone. 5 kHz LVL -06 to +06 [+05] [Q FIX] Storing your own adjustments Easy Equalizer While listening, you can adjust the subwoofer level and tone level of the selected sound mode. If no operation is done for about 60 seconds, the operation will be canceled. 2 Menu item DEMO CLOCK SET 24H/12H CLOCK ADJ *1 (Clock adjustment) DIMMER SET For settings , Selectable setting (Initial: [XX]) page 4. CLOCK BRIGHTNESS *3 DISPLAY SCROLL *4 TAG DISPLAY PRO EQ *1 *2 [AUTO]: The built-in clock is synchronized with the clock data received from the FM Radio Data System station. Selects the display and button illumination adjusted in the <BRIGHTNESS> setting. [AUTO]: Changes between the Day and Night adjustments when you turn off/on the car headlights. DAY/NIGHT: Brightness settings for the display and button illumination for day and night. ) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). Initial: DAY (BUTTON ZONE [25], DISP ZONE [31])/NIGHT (BUTTON ZONE [9], DISP ZONE [12]) Some characters or symbols will not be shown correctly (or will be blanked) on the display. ON: Boosts low and high frequencies to produce a well-balanced sound at a low volume level. ) WIDE: Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. [BT ADAPTER]: Select if the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100 ( page 10). *12 Displayed only when the unit is in any source other than the corresponding source “AM/ F-AUX/R-AUX/BT AUDIO”. [. . . ] €Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance. Cautions Do not pull out and attach the USB device repeatedly while “READING” is shown on the display. [. . . ]