User manual JVC KD-NX1R

[. . . ] Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Use of the navigation unit is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or inconvenience will be incurred to you, your passengers or other road users. It neither releases the driver from his duty to drive carefully in road traffic, nor does it take the place of his own ability to make judgement. it is possible that inaccurate or incorrect instructions are given due to changing traffic conditions or varying data. [. . . ] Requesting the road list During route guidance, the planned route list can be requested. Button reThe current road and the road names up to the destination are displayed. by pressing the right rotary control , the program returns to the route guidance display. Note: After destination entry, there is a short delay until the route list is created. If the vehicle is "off road" at the moment of destination entry, the route list cannot be created until a stored road is reached. Special destinations in the current surrounding area of the vehicle or special destinations near the destination can be selected. Special destinations Special destinations of your choice in countries contained in the navigation CD can be selected. The figures in kilometres relate to the direct distance (as the crow flies) between the special destination and the current location. The arrows following the distance information indicate the distance as the crow flies to the relevant special destination (e. Special destination lies in the direction of travel, special destination lies in the opposite direction to that of travel). Using the right rotary control , select the town name and press to confirm. Then select the town from the town selection list using the right rotary control and press again to confirm. using the right rotary control , select a category and press to confirm. A list with special destinations is displayed or if there are more than 9 entries in the list, you will be requested to enter text. A list with special destinations is displayed or if there are more than 9 entries in the list, you will be requested to enter text. Note: A list of possible special destinations is displayed by pressing the right rotary control for more than 2 seconds without having selected any letters. Note: A list of possible special destinations is displayed by pressing the right rotary control for more than 2 seconds without having selected any letters. Selection from , , , , , , , can be made by turning, and confirmed by pressing the right rotary control . The current position can be saved and stored in the destination memory. Setting the time In order to achieve correct navigation on routes requiring guidance under time restrictions and to calculate the estimated time of arrival, it is necessary to set the GMT time transmitted from satellites to the current time zone. Using the multifunction button the time can be changed from the 24 hour to the 12 hour display. Press the right rotary control for more than 2 seconds to confirm the name entered. [. . . ] - The audio source being listened to and the navigation announcement can be set to various levels. This can be used to switch on the CD changer AF connections if no CD changer is connected. Using the multifunction button select either (compass is displayed) or (compass is not displayed). If the compass display is switched off, 9 multifunction buttons are assigned transmitter abbreviations in FM DAS mode (route guidance not active). [. . . ]