User manual JVC KD-NX10

[. . . ] Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Use of the navigation unit is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or inconvenience will be incurred to you, your passengers or other road users. It neither releases the driver from his duty to drive carefully in road traffic, nor does it take the place of his own ability to make judgement. it is possible that inaccurate or incorrect instructions are given due to changing traffic conditions or varying data. [. . . ] If station names are being misused to send advertisements or messages, this station is indicated with L-1. The first time the unit is operated, or after the electrical supply has been interrupted, it may take the radio some time to evaluate the station signals. On the desired waveband (MW, SW) turn the right rotary control the left or right. You have the option of filtering various stations from the FM DAS station list. The first run is performed on an insensitive plane, all further runs on a sensitive plane. Once a PTY has been selected, only those stations can be selected in FM DAS mode that are provided with this PTY. If you select NO PTY in FM-DAS mode, all stations will once again be displayed. The individual programmes can be selected using the right-hand rotary control . By pressing the right rotary control , you can choose between Play (programme unfiltered) and Skip (programme filtered out). To turn the filter function on or off, press the multifunction button repeatedly to turn the filter function on (Fil on) or off (No Fil ). Turning PTY display on / off Storing: In each case up to 12 stations can be stored using the station buttons. With multifunction button , select either PTY (PTY Display On) or Frequency (PTY Display Off). In the Radio Menu Mode, select level Stations RDS or Stations FIX using multifunction button . Calling up a preset: Press multifunction button or and the stored station will be called up. Calling up stations: Press multifunction button or and the stored station will be called up. The 12 stations with the best reception are stored under the station buttons in order of quality. To exit the Autostore memory level, turn off the Autostore memory (Autostore off) with multifunction button . If the right rotary control is not turned after a short time, MAN will disappear from the display and manual tuning is turned off. If the right rotary control is not turned after a short time, MAN will disappear from the display and manual tuning is turned off. As a result, the RDS diversity function can lead to the radio switching between various regional programmes which may vary in terms of broadcasting content. In such a case, the special regional programming must be selected directly. If several regional programmes are transmitted by one station, this can only be seen when the station is selected. [. . . ] If the unit has not been calibrated, proceed as described in the next point but one. The following functions can be selected in the Service Mode: · gPS-INFO - Test of GPS Function · CALIBRATION - Function to delete the calibration or to enter a new calibration · When functionality and GPS reception are working correctly, the number of satellites received (i. A certain amount of time may be required to reach this value (do not move the vehicle during this period). Changing the calibration (CALIBRATION) Deleting the calibration: If the navigation system is removed from one vehicle and installed in another, the calibration must be performed again. [. . . ]