User manual JVC KD-HDR61

[. . . ] For Customer Use: Enter below the password you have entered for your security lock. BEDIENUNGSANLEITUNG Retain this password for MANUEL D'INSTRUCTIONS future reference. INSTRUCTIONS GEBRUIKSAANWIJZING PASSWORD: LVT0415-001A [E] NEDERLANDS FRANÇAIS DEUTSCH ENGLISH ENGLISH Position And Reproduction Of Labels Bottom panel of the main unit DANGER: Invisible laser radiation when open and interlock failed or defeated. (e) ADVARSEL: Usynlig laser stråling ved åbning, når sikkerhedsafbrydere er ude af funktion. (d) VARNING:Osynlig laserstrålning när denna del är öppnadoch spärren är urkopplad. [. . . ] 2 Press RND (Random), while "MODE" is still on the display, so that the RND indicator lights up on the display. Each time you press the button, CD random play mode turns on and off alternately. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. "MODE" appears on the lower part of the display, and the number buttons can work as different function buttons. 2 Press RPT (Repeat), while "MODE" is still on the display, so that the RPT indicator lights up on the display. Each time you press the button, CD repeat play mode turns on and off alternately. When the repeat mode is turned on, the RPT indicator lights up on the display. Track number of the currently playing track 22 To play back only intros (Intro Scan) You can play back the first 15 seconds of each track sequentially. "MODE" appears on the lower part of the display, and the number buttons can work as different function buttons. Each time you press the button, CD intro scan mode turns on and off alternately. When the intro scan mode is turned on, "INTRO" appears on the display for 5 seconds and the track number flashes. Track number of the currently playing track Prohibiting CD ejection SOURCE (ATT) OFF/0 You can prohibit CD ejection and can lock a CD in the loading slot. While pressing SOURCE (ATT), press and hold OFF/0 for more than 2 seconds. If you want to adjust and store your original sound mode, see "Storing your own sound adjustments" on page 28. · To adjust the bass and treble reinforcement levels or to turn on/off the BBEII function temporarily, see pages 24 and 25. (Your adjustments will be canceled if another source is selected. ) · By setting "CLOCK DISP" to "CLK DISP OFF" (see page 34), you can always show the current sound mode setting when the unit is turned on. 27 ENGLISH Recalling the sound modes ENGLISH Storing your own sound adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 26) to your preference and store your own adjustments in memory. 4 3 2, 5 1 1 Light "MODE" on the lower part of the display. The number buttons can work as different function buttons. REMEMBER you must finish the following steps while "MODE" is still on the display. Otherwise, the setting will be canceled. 2 3 4 Select the sound mode you want. For details, see page 26. Select the item you want to adjust (BAS, TRE, or BBEII). Adjust the selected item. 5 Press and hold SCM until the sound mode you have selected flashes on the display. Your adjustment made for the selected sound mode is stored in memory. 6 Repeat the same procedure to adjust other sound modes. To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 26. 28 OTHER MAIN FUNCTIONS You can also set the clock system either 24 hours or 12 hours. 1, 5 2, 3, 4 2, 3, 4 1 2 Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears on the display. 1 Select "CLOCK MINUTE. " 2 Adjust the minute. 4 1 2 Set the clock system. 1 Select "CLOCK24H/12H. " 2 Select "CLOCK 24HOUR" or "CLOCK 12HOUR. " 5 Finish the setting. To check the current clock time while the unit is turned off, press + or ­. The power turns on, the clock time is shown for 5 seconds, then the power turns off. 29 ENGLISH Setting the clock ENGLISH Controlling the volume automatically (Audio Cruise) You can select the proper cruise mode for your car. [. . . ] When storing a CD into its case, gently insert the CD around the center holder (with the printed surface facing up). Center holder To keep CDs clean A dirty CD may not play correctly. If a CD does become dirty, wipe it with a soft cloth in a straight line from center to edge. To play new CDs New CDs may have some rough spots around the inner and outer edges. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. Moisture condensation Moisture may condense on the lens inside the CD player in the following cases: · After starting the heater in the car. [. . . ]