User manual JVC KD-G505

[. . . ] There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. How to reset your unit After detaching the control panel, press the reset button on the panel holder using a ballpoint pen or a similar tool. How to use the MODE button If you press MODE, the unit goes into functions mode, then the number buttons and 5/ buttons work as different function buttons. [. . . ] 1: To select file number 32 while playing file number 6 To select a folder number from 07 12: Press and hold 1 (7) 6 (12) for more than one second. If indicator flashes on the display after you have selected a folder, it means that the folder does not contain any MP3 files. 2 : To select file number 8 while playing file number 36 Press 5 (up) while playing an MP3 disc to skip to the next folder. Each time you press the button consecutively, the next folder is located (and the first file in the folder starts playing, if recorded). Press (down) while playing an MP3 disc to skip back to the previous folder. Each time you press the button consecutively, the previous folder is located (and the first file in the folder starts playing, if recorded). All files of the current folder, then files of the next folder and so on. You can play back the current file or all the files in the current folder repeatedly. You can play back all files of the current folder or all files on the MP3 disc at random. Each time you press the button, the repeat play mode changes as follows: Press MODE to enter the functions mode while playing an MP3 disc. press RND (random) , while "MODE" is still flashing on the display , so that "FLDR RND" or "DISC RND" appears on the display. Each time you press the button, the random play mode changes as follows: You can select a preset sound mode (C-EQ: custom equalizer) suitable to the music genre. For: (Flat sound) Rock or disco music Classical music Light music Funk or rap music Jazz music Select the sound mode you want. Each time you press the button, the sound modes change as follows: USER Note: You can adjust each sound mode to your preference. Once you make an adjustment, it is automatically stored for the currently selected sound mode. To increase the level or turn on the loudness To decrease the level or turn off the loudness Indication pattern changes as you adjust the bass or treble. Each time you press the button, the adjustable items change as follows: Repeat steps 1 and 2 to adjust the other items. Boost low and high frequencies to LOUD ON produce a well| balanced sound LOUD OFF at low volume level. To reset each sound mode to the factory settings, repeat the same procedure and reassign the preset values listed in the table on page 22. Adjustment you have made is stored for the currently selected sound mode (C-EQ) including "USER. " *2 If you are using a two-speaker system, set the fader level to "00. So you do not have to select "VOL" to adjust the volume level. [. . . ] If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. If you are not sure how to install this unit correctly, have it installed by a qualified technician. *1 When you stand the unit, be careful not to damage the fuse on the rear. Insert the two handles, then pull them as illustrated so that the unit can be removed. [. . . ]