User manual JVC KD-A535

[. . . ] For security reasons, a numbered ID card is provided with this receiver, and the same ID number is imprinted on the receiver's chassis. Keep the card in a safe place, as it will help the authorities to identify your receiver if stolen. DO NOT install any receiver in locations where; ­ it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident. ­ it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident. [. . . ] Select playback file type when a disc contains both MP3 and JPEG files. PCM ONLY (PCM) : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS or MPEG Audio, or connecting to a recording device. DOLBY DIGITAL/PCM (DOLBY DIGITAL) : Select this when connecting an amplifier or a decoder compatible with Dolby Digital. STREAM/PCM (STREAM) : Select this when connecting an amplifier or a decoder compatible with Dolby Digital, DTS, and MPEG Audio. When playing back a multi-channel DVD disc, this setting affects the signals reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal when "PCM ONLY (PCM)" is selected for "DIGITAL AUDIO OUTPUT (D. DOLBY SURROUND : Select this when you want to enjoy multichannel surround audio by connecting an amplifier compatible with Dolby Surround to this receiver. You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software. Each time you press 4/¢ , the menu screen disappears for a few seconds and you can see the result of the adjustment. BRIGHT: ­15 to 0 to +15 Adjust if the picture is too bright or too dark. CONTRAST: ­15 to 0 to +15 Adjust the contrast of the bright and dark portion. 35 In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. Auto: [Initial]; When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. ) Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be degraded. Travel [Initial] O Warning O News O Weather O Event O Special O Rad Inf (Radio Information) O Sports O Finance O (back to the beginning) CHANGER: [Initial]; To use a JVC CD changer, [50]. You can deactivate the key-touch tone if you do not want it to beep each time you press a button. Muting1/Muting2: Select either one which mutes the sounds while using the cellular phone. High Power: [Initial]; VOL 00 ­ VOL 50 Low Power: VOL 00 ­ VOL 30 (Select this if the maximum power of the speaker is less than 50 W to prevent them from damaging the speaker. You can determine the use of LINE IN and VIDEO IN jacks on this receiver. The rear view through the camera is automatically displayed on the monitor when you change the gear to the back position. *4 : The mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only; the normal rear view appears on the external monitor. *4 Reverse gear signal connection is needed to change the monitor view automatically. [. . . ] When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming. After you change any of these language settings, eject the disc and insert it (or another disc) again so that your setting takes effect. When you select "16:9" for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. [. . . ]