User manual JVC JX-S700

[. . . ] (800) SMART-HOME (949) 221-9200 http://smarthome. com For Customer Use: Enter below the Serial No. Retain this information for future reference. Model No. J X-S700 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. INFORMATION This equipment has been tested and found to comply with the I A CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERWING TO QUALIFIED SERVICE PERSONNEL. I The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the n I l user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] (The voltage may differ slightly even if they are the same shape. ) Also, carefully read the instructions labeled on the battery. I~ -_ _ - T When the unit is not to be used for an extended period of time, remove the batteries to prevent corrosion. Battery replacement: When the operable range of the remote control becomes shorter, the batteries have nearly expired. The same audio signal will be supplied to both the left and right channels. Smarthome. com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome. com a Video Program The video program from the VCR selected by the SOURCE SELECT buttons can be viewed on the monitor TV. c How--to play a VCR connected to 1R-m) ---- / Color TV From MONITOR OUT To INPUT-l terminals I 3 Ir-------- SOURCE SELEC I -___ I Turn ON the power of the JX-S700 (the POWER indicator of the JX-S700 lights). 3 Press the SOURCE SELECT-l button (the indicator of the JXS700 lights). 1 c-3 77 PWR I- - ml `I' 1. k I PI \I/ -I I - ' I' 2 TV. Turn ON the power of the Playback VCR and color 4 Star-t playback of the VCR. The illustrations show operation with the remote control. Smarthome. com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome. com Also, carefully read the instruction manuals of the connected components. In the same way as described on page 12, press the corresponding SOURCE SELECT button and then start playing the required video component. -Technical Information / How video signals are processed in the JX-S704 . __ n Since the JX-S700 is equipped with Y/C-separator and Y/C mixer circuits, both S-Video and Video (composite) signals are supplied to the OUTPUT terminals, regardless of the type of signals input. If both S-Video and Video (composite) signals are input to the INPUT terminals of the JX-S700 at the same time, the S-Video signal has priority. Signal ----___ L--. - flow indication of input video signals H Depending on the type of cables connected to the INPUT terminals selected by the SOURCE SELECT button, the indicators light as follows: I I S-IN S-Video plug Video plug n Y/C SEPARATOR Not lit -. _ Lights Y/C MIXER I ' Lights Not lit Lights Not lit n When both S-Video and Video (RCA) plugs are connected at the same time, only the S-Video plug is effective and the S-Video signal has priority. When neither S-Video nor Video plugs are connected, only the Y/C SEPARATOR indicator lights. n Note: Connect the S-Video plugs securely. If not, the indicators may not light correctly. Smarthome. com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome. com 13 Video Editing ----HOW to Edit from a camcorder connected to INPUT-3 onto VCRs connected to OUTPUT=1/2/4 /' - - -___-~---~ --__--. . __~___. - `: Color TV Recording VCR @ Recording VCR @ Recording VCR @ From OUTPUT-l/-%4 terminals From MONITOR OUT terminals Refer to "Tips for Better Use" on page 15. Preparation Turn ON the power of the JX-S700 and each component (the POWER indicators of the JX-S700 light). I 2 Press the SOURCE SELECT-3 button (the indicator of the JX-S700 lights). R WR 4/ - I , -- / I' Start recording of the VCR(s), and start playback of the camcorder. Camcorder Recording VCR (g, 0, @ I 1 I 1 The illustrations show operation with the remote control. Ba sure to make a test recording before recording an Important program. n Notes on edlting: It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. n When performing editing, be sure to set the input select switch of 1110 rrv-nrrtmrl \Fll tn f-XT fnr AI tW irlr\l it rrmtt~ manual ot each component. Preparation - T i p s for Better Use I Tips For Better Use About "Key Lock" mode: While the recording VCR is being operated, by pressing the KEY LOCK button on the JX-S700 will lock the key operation and thus effectively prevent mis-operation. When in Key Lock mode, only the MONITOR SELECT, MONITOR VIDEO MUTE and KEY LOCK buttons are effective. Therefore, if another button is mistakenly pressed during editing, the JX-S700 continues operation. KEY LOCK R Indicator of the JX-S700 lights. -/ - I I' WY LOCH? Note on use: a When changing operation mode during Key Lock status, first press the KEY LOCK button to release Key Lock mode. Smarthome. com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome. com 15 How To Edit With an AV Processor `-__________. _ -___- -____. ____ Editing from an S-Video VCR connected to INPUT-1 to a VCR connected' to OUTPUT-2 via the AV Processor I 1 -. _. - _-. __. _ _____ _______. _. _ _ . _ __. -1' Color TV Recording VCR ^ Playback VCR - I I PreparationI From MONITOR OUT terminals . From OUTPUT-2 terminals To INPUT-1 terminals Preparation 2 From PROCESSOR OUT terminals To PROCESSOR IN terminals AV Processor with S-Video terminals (Video Titter) Preparation Turn ON the power of each component (the POWER indicator of the JX-S700 light). 3 4 Start playing the playback VCR. m R I I Operate the Video Titler as required. \ WINTER HOLIDAY Press the SOURCE SELECT-l button (the indicator of the JX-S700 lights). Press the PROCESSOR "AUDIO" and "VIDEO" buttons (the indicators of the JX-S700 light). AUDIO VIDEO I 5 Start recording with the recording VCR. Recording VCR 0 REC r-l Also, carefully read the instruction manuals of each component. i Connectrons when using an AV processor Since the built-in Y/C separator and Y/C mixer circuits are not applied to the PROCESSOR OUT terminals of the JX-S700 (but effective for signal input to the PROCESSOR IN terminals), connect the AV processor in the following manner: n When using an AV processor with S-Video terminals l Signal flow from the playback VCR with S-Video terminals: Processor l Signal flow from the playback VCR without S-Video terminals: I Processor --I +i VA J X - S 7 0 0 s* v) (Pictures may not be monitored depending on the type of processor used. Refer to "Cautions" below. ) *It is recommended that both S-Video and Video cords be plugged for connection between the processor and the JX-S700, so that either type of VCR (shown above) can be used for playback. n When using an AV processor without S-Video terminals l Signal flow terminals: from the playback VCR with S-Video Processor l Signal flow from the playback VCR without S-Video terminals: 1 I v , Processor 44 JXS700 : I I VA w_s JX-S700 1V: , s J 'V: *When the processor is not used, use the S - V i d e o connection cord between the JX-S700 and the playback VCR for monitoring pictures in better quality. Note when l Dual Operation is required: When performing parallel editing, the processor loop will be effective only for the Line-A components. Cautions on connections between VCR without S-Video terminals and processor with S-Vldeo terminals 1. When an S-Video/Video select switch is provided on the processor: l Set the switch to "Video" position. When an S-Video/Video select switch is not provided and there is only one input line: l When the S-Video input terminals are used, S-Video signals have priority. l When inputting signals from a VCR without S-Video terminals, unplug the S-Video cord from the input terminals of the processor. 3 When an S-Video/Video select switch is not provided and there are two input lines: = Connect the S-Video cord into either of the input terminals and connect the standard video cord into the other. [. . . ] (800) SMART-HOME (949) 221-9200 http://smarthome. com 23 BLOCK DIAGRAM e 3i 3 ~ 0 . -0 3 a I lluul3Ltalluu I IIUb What appears to be a malfunction may not always be serious. Symptom No power n II * - ' `_ `, . , . , ri Cau&( a :;b, , i++~+~ * pr . 4x \(i `, * Is the power cord disconnected from the 1 n n n Remedy 1'. ______ Incorrect picture = Are the video components correctly connected to the INPUT/OUTPUT terminals and is the correct SOURCE SELECT button pressed? [. . . ]