User manual JVC HR-XVC15UC-HR-XVC15 Instruction Manual

[. . . ] DVD/CD PLAYER Hi-Fi STEREO VIDEO CASSETTE RECORDER USER'S GUIDE For model: HR-XVC15U For Customer Use: Enter below the Model No. Serial No. LPT0787-001A *J2C31501A* CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] Each additional press of REC will increase recording time as shown in the chart below, up to a maximum of 6 hours. The ITR and recording time will appear on the screen for about 4 seconds. And, REC will keep blinking in the display. Press Recording time NORMAL REC once twice 0:30 3 times 1:00 4 times 1:30 5 times 2:00 Press Recording time 3:00 6 times 4:00 7 times 5:00 8 times 6:00 9 times 10 times NORMAL REC ITR 0 : 30 CH 110 INDEX NOTE: If you wish to watch the DVD playback during the ITR, press DVD to change to DVD mode and perform the DVD playback (see page 37). To cancel ITR Press STOP or turn off the power. " " will appear on screen for about 4 seconds. 30 Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Example: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP). 1 Press SET UP MENU. the program line, then MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP +//ENTER/MENU DATE START END : : : : : : : : : : : : : : : : CH +//ENTER/CANCEL/MENU SET + or to 3 Presspress ENTER. select the date, then DATE START END CH 26(SU) : : : : : : : : : : : : : : : : +//ENTER/CANCEL/MENU time, 4 Set the start time, endstep 3. channel and tape speed as in NOTES: NOTES: If the clock symbol ( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape supply. In this case, press TIMER to cancel the timer program or press EJECT to remove the cassette tape. During timer recording standby mode, the VCR mode cannot be selected. To use the VCR, press TIMER at first, then press VCR to change to VCR mode. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode. If you press TIMER during timer recording, the recording operation will be interrupted. If you press TIMER again within the programmed time, the recording operation will start again. After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock (see pages 21-23) and reprogram any timer recordings. If the start time is over the present time, the entered program will be canceled after pressed ENTER. "L" will appear next to CH 125 (or 69). DATE START END CH 26(SU) 11:00PM 11:30PM 125 EP : : : : : : : : : : : : : : +//ENTER/CANCEL/MENU enter 5 Tothroughother programs, repeat step 2 4. To return to the normal screen, press SET UP MENU twice. DATE START END CH 26(SU) 11:00PM 11:30PM 125 EP : : : : : : : : : : : : : : +//ENTER/CANCEL/MENU ( ) will appear on 6 Press TIMER. At the the display and the VCR stands by same time, VCR mode will change to DVD mode automatically. The timer recording will start at 5 seconds before the time you predetermined. NOTES: If the clock symbol ( ) does not appear on the display in spite of the pressing of TIMER, the cassette may not have been loaded yet (see page 24). [. . . ] For your nearest JVC authorized service center, please call toll free: (800) 537-5722. If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. If you have any questions concerning your JVC Product, please contact our Customer Relations Department. WHAT IS NOT COVERED: This limited warranty provided by JVC does not cover: 1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service, or if affixed to any attachment not provided with the products, or if the model or serial number has been altered, tampered with, defaced or removed; 2. [. . . ]