User manual JVC HR-XV1EU

[. . . ] DVD PLAYER Hi-Fi VIDEO CASSETTE RECORDER USER'S GUIDE For model: HR-XV1EU DIGITAL VIDEO LPT0715-001A Safety Precautions SAFETY FIRST The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial. CAUTION: A DVD/VCR IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VCR USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. [. . . ] If you press again within the programmed time, the recording operation will start again. Setting a day of the week: You have selected DAILY or WEEKLY in step 3, then you can select recording date again. If it does not blink, then press or repeatedly until or repeatedly until the DATE blinks. The following date are stand for your selection: SUNSAT: all dates from Sunday to Saturday, or MON-SAT: only dates from Monday to Saturday, or MON-FRI: only dates from Monday to Fryday. WKL-MON: each Monday, WKL-TUE: each Tuesday, . . . , WKL-SUN: each Sunday. Change the recording start-time: The recording start-time will be set by SHOWVIEW automatically. Then press to change. Recording period extension: The recording end-time will be set by SHOWVIEW automatically. Then press to extend. Select Tape speed: Select the recording tape speed Standard Play (SP) or Long Play (LP). Then press or to select "SP" or "LP". 32 Timer-Recording Timer recording can be programmed on the TV-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. (The VCR indicator will light) Load a video cassette with the erase prevention tab intact. Example: Timer recording for channel 1, 13:00 to 14:30 with Tape speed LP on timer program number 1. or Then press OK. ATS (AUTO TUNING SYSTEM) TIMER REC SET VCR EXTENSION VCR SETUP CHANNEL SETUP SYSTEM SETUP SELECT : ENTER : OK EXIT : MENU stand for 2 Each linememories. one program of the 8 Select one line with OK. Then press ----------------------------------------- --:---:---:---:---:---:---:---:-- --:---:---:---:---:---:---:---:-- --------- - SELECT : / OK EXIT : MENU the desired date with or 3 Setor number keys. Then press to accept it. TIMER REC SET DATE 23 MON START 11:30 --:-END CH 3 TV3 SPEED SP VPS/PDC OFF SELECT : SET : / 09 EXIT : MENU Starting time (13:00), 4 Set the time (14:30), channel (1 ending ARD), Tape speed (LP) and VPS/PDC (P. 35) in the same way as the step 3. In case of an erroneous input press to go back to before step and enter again. Note: In the event of a power failure the data of the automatic recording will be maintained in the built-in memory for about 30 minutes. When the power resumes, the time display will change to "--:--" that the timer setting will have to be set. TIMER REC SET DATE 23 MO START 13:00 END 14:30 CH 1 ARD SPEED LP VPS/PDC ON SELECT : SET : OK : OK EXIT : MENU . . . . to be continued to next page 33 Timer-Recording 5 Press OK to accept them. To enter other programs, repeat steps 2 through 4. To return to the normal screen, press SET UP MENU twice. 23 MON 13:00 ------------------------------------ --:---:---:---:---:---:---:-- 14:30 --:---:---:---:---:---:---:-- -------- 1V LP - In case of Timer progarms-overlapping Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below. 8 : 00 Program 1 Program 2 Deleted Parts Program 3 Non Recorded Portion Parts SELECT : / OK EXIT : MENU 9 : 00 10 : 00 11 : 00 Press () 6 display. The clock symbolstandswill appear on the and the DVD/VCR by for recording. If the clock symbol ( ) blinks in the display in spite of the pressing of , the cassette may not have been loaded yet. (see page 22) If the cassette is ejected in spite of the pressing of , the erase prevention tab of the cassette may have been removed. (see page 22) Note: In case of the timer recording from the scart socket, proceed as follows: In step 4 press or repeatedly until the "CH" line blinks. [. . . ] : To turn off the display CD TEXT Displays CD text data if included on the audio CDs. (Some letters may not be displayed properly depending on the disc. ) ZOOM C : Chapter number Press / or number keys to locate a Chapter, then press OK (Enter). : Audio Out Select setting BST: Bitstream 2CH:Analog 2ch PCM:PCM See page 56. Data transfer rate (Mbit/s) Amount of picture, sound and subtitle data in the DVD video disc transferred per second. [. . . ]