User manual JVC HR-S6950

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JVC HR-S6950. We hope that this JVC HR-S6950 user guide will be useful to you.


JVC HR-S6950 : Download the complete user guide (3904 Ko)

Manual abstract: user guide JVC HR-S6950

Detailed instructions for use are in the User's Guide.

[. . . ] ENGLISH CONTENTS SAFETY FIRST INDEX INSTALLING YOUR NEW RECORDER 2 4 9 10 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 VIDEO CASSETTE RECORDER INITIAL SETTINGS Auto Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 SAT CONTROL SET T-V LINK 15 17 Satellite Receiver Control Setting . . . . . . . . . 17 PLAYBACK RECORDING 18 22 Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The recorder starts or stops recording by the signals input from the satellite receiver. After recording, the recorder's power shuts off automatically. ATTENTION Be sure not to turn on the satellite receiver before the programme is executed; otherwise, the recorder will start recording when the satellite receiver's power is turned on. If you have connected another appliance other than a satellite receiver to the AV2 (L-2) IN/DECODER connector, be sure not to engage the Automatic Satellite Programme Recording mode; otherwise, the recorder will start recording when the connected appliance's power is turned on. Automatic Satellite Programme Recording and timer-recording cannot be done at the same time. Before performing the following steps: Make sure the satellite receiver is connected to the recorder's AV2 (L-2) IN/DECODER connector. Insert a cassette with the safety tab in place. A Select the L-2 SELECT mode. Set "L-2 SELECT" to "A/V" or "SAT" ( When you select "SAT", refer to "IMPORTANT" on page 42. pg. 41). B Set the tape speed. Press SP/LP/EP (p). It is not possible to select EP mode if "COLOUR SYSTEM" is set to "MESECAM". Satellite Programme Recording Press and hold SAT# for about 2 seconds. The " indicator lights up and the recorder turns off automatically. " To disengage the Automatic Satellite Programme Recording mode, press SAT#. If the recorder's power is off, it is not possible to engage the Automatic Satellite Programme Recording mode. In step 3, if the " " indicator does not light but instead blinks quickly even though your satellite receiver's power is off, Automatic Satellite Programme Recording will not work properly with that satellite receiver*. If this is the case, perform "Express Timer Programming" ( pg. 28) to timer-record a satellite programme. * Some satellite receivers output signals even if the power is off. Automatic Satellite Programme Recording is not possible with those satellite receivers. NOTES: The " " indicator blinks while Automatic Satellite Programme Recording is in progress. For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver. Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer. Pressing the recorder's 1 button while Automatic Satellite Programme Recording is in progress turns off the recorder's power and disengages the Automatic Satellite Programme Recording mode. If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording, it is not possible to set different tape speeds for each programme. Depending on the type of satellite receiver, the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme. If you engage the Automatic Satellite Programme Recording mode when the satellite receiver's power is on, the recorder will not start Automatic Satellite Programme Recording even though the " " indicator blinks. When the satellite receiver shuts off once and is turned back on again, the recorder starts recording. You can also record a programme from your cable system in the same way if the system has a timer. [. . . ] 21 D Delete A Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 DIRECT REC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 48 S Satellite Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Set Stations (A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Set Stations (B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JVC HR-S6950




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JVC HR-S6950 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.