User manual JVC GZ-RX515

[. . . ] CAMCORDER GZ-RX515 GZ-RX510 Detailed User Guide C5B7_RX515_EU_EN Table of Contents Getting Started Verifying the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Turning on this Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Resetting this Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 0 After setting, tap “OK”. 67 Editing Protecting/Releasing Protection of Selected Files Protects or releases protection of the selected files. 6 Tap on the files to protect or release protection of. 1 Open the LCD monitor. . 0 P appears on the selected files. To remove P from a file, tap on the file again. 0 I and P are displayed on the files that are already protected. 7 Tap “SET” to complete the setting. To release protection of a file, tap on the file such that P is removed. . 0 Tap A or B to select the video or still image mode. 0 Tap B or A on the recording screen to display the mode switching screen. Tap B to switch to the still image mode B. 2 Tap M to select the playback mode. . 0 Protect marks I appear on the selected files. Protect marks I disappear from the deselected files. . 0 While the video mode is shown in the image, the same operations apply for the still image mode. 3 Tap “MENU”. . 4 Tap “EDIT”. . 5 Tap “PROTECT/CANCEL”. . 68 Editing Capturing a Still Image in the Video During Playback You can capture still images of the scenes you like in the recorded videos. 5 Tap the A button. 1 Open the LCD monitor. . 0 Still images are captured with a size of 1920×1080. 0 Captured still images are stored in the media where the video is being played back from. Memo : . 0 Check if the recording mode is A. 0 If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. 2 Tap M to select the playback mode. . 3 Tap on the desired video. . 4 Tap pause e at the desired scene during playback. . 0 After pausing the video, you can fine-tune the point to capture by tapping forward slow-motion k and reverse slow-motion l. 69 Editing Combining Videos Recorded by Seamless Recording Videos that are recorded on two separate media and with “SEAMLESS RECORDING” in the video recording menu enabled can be combined into a single video. 133) 6 Tap “COMBINE SCENES”. 1 Open the LCD monitor. . 0 This unit starts a search to detect seamless videos. 7 Tap “YES”. Combining cannot be performed if no seamless videos are found. . 0 Check if the recording mode is A. 0 If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. . 8 Tap the media to store to. 2 Tap M to select the playback mode. . 9 Tap “YES”. . 3 Tap “MENU”. . 0 Combining of the videos starts. 0 After videos are combined, tap “OK”. . 4 Tap “EDIT”. Memo : 0 Seamless videos cannot be combined if there is not enough free space in the built-in memory or SD card. Check the amount of remaining free space before combining. How to Enable Seamless Video Recording Again To start seamless recording again after the previous session is complete, it is necessary to combine seamless videos, or delete the combination information of the seamless videos. To delete the combination information of seamless videos, select “DEL COMBINED SCENES” in step 6. . 5 Tap “SEAMLESS REC CTRL”. . 70 Editing Capturing a Required Part in the Video (TRIMMING) Select the required part of a video and save it as a new video file. 0 The original video remains in its existing location. 6 Tap the video to edit. 1 Open the LCD monitor. . 7 Tap e to pause playback at the desired start point, then tap “A”. . 0 Check if the recording mode is A. 0 If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. . 0 When “A” is tapped, the start point is set. 8 Tap e to pause playback at the desired end point, then tap “B”. 2 Tap M to select the playback mode. . . 3 Tap “MENU”. 0 When “B” is tapped, the end point is set. 0 To reset the start or end point, tap “A” or “B” at the desired scene (position). 0 You can fine adjust the position by pressing l and k while playback is paused. 9 Tap “SET”. . 4 Tap “EDIT”. . 0 When “SET” is tapped, the trimming area is confirmed. 10 Tap “YES”. . 5 Tap “TRIMMING”. . 0 After copying, tap “OK”. 0 When copying finishes, the copied file is added to the index screen. 0 The division point may deviate slightly from the selected scene. . Memo : 71 Copying Dubbing Files to a Disc by Connecting to a Blu-ray Recorder You can dub videos in the high definition quality by connecting an AVCHDcompliant Blu-ray recorder to this unit via a USB cable. [. . . ] (All data on the built-in memory or SD card will be deleted. ) “ FORMAT BUILT-IN MEM. 144) NUMBER OF FOLDERS OVERFLOW A Move the files or folders to a computer or other device. (Back up your files. ) B Select “FILE + MANAGEMENT NO” in “FORMAT BUILT-IN MEM. ” or “FORMAT SD CARD” of the “SETUP” menu. (All data on the built-in memory or SD card will be deleted. ) “ FORMAT BUILT-IN MEM. [. . . ]