User manual JVC GZ-MG555 Instruction Manual

[. . . ] Before use, please read the safety information and precautions contained in pages 2 and 3 to ensure safe use of this product. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16 ) or more on both sides, on top and at the rear). ) No naked flame sources, such as lighted candles, should be placed on the apparatus. [. . . ] 8 To cancel the selection Set the number of prints to "00" in step 5. 8 To confirm DPOF settings In step 3, move the set lever to / to select [CHECK SETTINGS], then press down. If necessary, change the number of prints for the desired file by following steps 4 and 5. 8 To reset DPOF settings 1) In step 3, move the set lever to / to select [RESET], then press down. If your printer is compatible with PictBridge, still images can be printed easily by connecting the camera directly to the printer with the USB cable. 8 To confirm DPOF settings In step 3, move the set lever to / to select [CHECK SETTINGS], then press down. If necessary, change the number of prints for the desired file by following steps 4 and 5. 37) 8 To reset DPOF settings 1) In step 3, move the set lever to / to select [RESET], then press down. To Print Using the DPOF Settings If the printer is compatible with DPOF, you can use the DPOF settings. 8 To confirm the DPOF setting In step 4, move the set lever to / to select [CHECK SETTINGS], then press down. You cannot return to the previous screen If you want to redo the operation, remove the USB cable, switch off the camera's power, and start the operation again from the beginning. 8 To stop printing after printing starts 1) Press down the set lever. Using a DVD Burner to Copy Files from the Camera (DVD Creation Function) Regarding DVD-RW discs, used DVD-RW discs can also be used, but they need to be formatted before recording. The disc is automatically finalized so that it can be played on other devices. After finalizing, the disc is a play-only disc, so no more files can be added. Types of Copying and Connectable Device The Camera You can copy still images between the HDD and SD card with this camera alone. DVD Burner (CU-VD10/CU-VD20) You can copy video files recorded on this camera onto DVD discs. ( right column) VCR/DVD Recorder You can dub video files recorded on this camera onto DVD discs. VCR/DVD Player Videos from a VCR/DVD player can be dubbed onto the camera's HDD. Copying Only the Newly Taken Video Files Files that have never been copied to the DVD discs are automatically selected and copied. Selecting and Copying Video Files After performing step 1 ( left column) When [COMPLETED] appears, press down the set lever to complete the operation. Move the set lever to / to select the recording date, then press down. [. . . ] This is a chemical reaction type battery -- cooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging. Fully charge and then fully discharge the battery every 6 months when storing the battery pack over a long period time. Remove from charger or powered unit when not in use, as some machines use current even when switched off. When formatting or erasing data using the The data is not completely erased from the hard disk. [. . . ]