User manual JVC GZ-MC200US

[. . . ] MasterPage: Cover GZ-MC200US. book Page 1 Wednesday, November 24, 2004 8:18 PM ENGLISH GETTING STARTED Basic Edition DIGITAL MEDIA CAMERA 6 19 GZ-MC200 BASIC OPERATIONS (RECORDING & PLAYBACK) MENU SETTINGS 26 32 REFERENCES To deactivate the demonstration, set “DEMO MODE” to “OFF”. 26) INSTRUCTIONS This instruction manual describes the basic operations of the camera. For more information, read the advanced operation manual provided as HTML format in the CD-ROM. See page 32 for details. For Customer Use: Enter below the Model No. [. . . ] 2 Press MODE to select . ● The camera is programmed to record still images on the medium in the CF slot by the factory preset. ● To change the image size and picture quality, see pages 26 and 29. Keeping the recording start/stop button pressed in step 3 provides an effect similar to serial photography. 26, 29) ● Continuous shooting may not work well depending on the recording medium. Deleting Files If you press during recording mode, the file recorded most recently will be deleted. ● However, if the recording mode (video, still image or voice) is switched or the power is turned off and on again after recording, you cannot delete the file. 3 Press the recording start/stop button. The still image is recorded. ● To check how the image looks before recording, press the recording start/stop button halfway and hold. The indicator appears and stops blinking when the captured image is focused. To record it on the recording medium, press the recording start/stop button fully. MasterPage: Basic_Right GZ-MC200US. book Page 23 Wednesday, November 24, 2004 8:18 PM BASIC OPERATIONS EN 23 Still Image Playback Zoom Lever Slide Show You can playback all the images stored in recording media automatically. INFO 1 Perform steps 1 – 2 in the left column. 2 Press 49 to start the slide show. MODE 49 Power Switch Lock Button To display the next image Normal Playback To display the previous image 3 5 Slide Show 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. ● A still image is displayed. ● To switch the medium to be played back, see pages 26 and 27. . Deleting Still Image Files ● You can select the desired file to be deleted by pressing w e. ● To delete multiple files at once, see pages 26 and 29. Press 49. , then press rt to select [EXECUTE] and press 3 Press 3 to display the previous file. Press 5 to display the next file. To turn on/off the on-screen display / To check the file information Press INFO repeatedly. To select the file on the index display Slide the zoom lever to W so that the index display appears. Then press rtw e to select the file and press 49. NOTES: ● Images shot and stored on the recording media with another device may not be played back correctly. 32) BASIC OPERATIONS ● If you press t during the slide show, files are displayed in descending order. ● If you press r during the slide show, files are displayed in ascending order. ● To end the slide show, press 49 again. MasterPage: Body_Left GZ-MC200US. book Page 24 Wednesday, November 24, 2004 8:18 PM 24 EN BASIC OPERATIONS Voice Recording Zoom Lever Voice Playback 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. ● To change the playback speed, see pages 26 and 30. ● To switch the medium to be played back, see pages 26 and 27. . Recording Start/ Stop Button 3 Press 49 to start playback. 4 To pause playback, press 49 again. To adjust the speaker volume During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume. To select the file on the index display Slide the zoom lever to W when playback is paused so that the index display appears. Then press rt to select the file and press 49. MODE 2 Power Switch Lock Button 49 3 6 5 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select ● The camera is programmed to record voice on the medium in the CF slot by the factory preset. ● To change the sound quality and recording level, see pages 26 and 30. Playback Operations High-Speed Search Press 3 or 5 during playback. Locating the start point of the file or skip the file Press 2 or 6 during playback or pause mode. . 3 Press the recording start/stop button to start recording. [. . . ] If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole. Keep it away from direct sunlight. Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer. When requesting repairs for malfunctioning by your dealer or JVC service center, be sure to bring your camera together with the removable hard disk. If one of them is not included, the cause cannot be diagnosed, and the repair cannot be made properly. [. . . ]