User manual JVC GZ-MC100US

[. . . ] MasterPage: Cover GZ-MC100US. book Page 1 Thursday, November 25, 2004 10:44 AM ENGLISH GETTING STARTED Basic Edition DIGITAL MEDIA CAMERA 6 19 GZ-MC100 BASIC OPERATIONS (RECORDING & PLAYBACK) MENU SETTINGS 26 32 REFERENCES To deactivate the demonstration, set “DEMO MODE” to “OFF”. Model No. INSTRUCTIONS This instruction manual describes the basic operations of the camera. For more information, read the advanced operation manual provided as HTML format in the CD-ROM. See page 32 for details. Serial No. LYT1337-001B EN MasterPage: Safty_Left GZ-MC100US. book Page 2 Thursday, November 25, 2004 10:44 AM 2 EN Major Features of this Camera Removable hard disk In contrast to conventional digital video cameras that record to DV tapes, the removable hard disk is a new type of card media that enables extended hours of highresolution, MPEG2 video recording. [. . . ] , then press rt to select [EXECUTE] and press ● You can select the desired file to be deleted by pressing w e. ● To delete multiple files at once, see pages 26 and 29. BASIC OPERATIONS MasterPage: Body_Left GZ-MC100US. book Page 22 Thursday, November 25, 2004 10:44 AM 22 EN BASIC OPERATIONS NOTES: ● There may be differences in the brightness between the recorded video and still image, even if the same subject is shot. ● For approximate number of storable images, see page 42. Still Image Recording Power Switch MODE Recording Start/Stop Button Continuous Shooting Keeping the recording start/stop button pressed in step 3 provides an effect similar to serial photography. 26, 29) ● Continuous shooting may not work well depending on the recording medium. Lock Button When shooting with the flash, be careful not to cover it. Deleting Files If you press during recording mode, the file recorded most recently will be deleted. ● However, if the recording mode (video, still image or voice) is switched or the power is turned off and on again after recording, you cannot delete the file. 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select ● The camera is programmed to record still images on the medium in the CF slot by the factory preset. ● To change the image size and picture quality, see pages 26 and 29. . 3 Press the recording start/stop button. The still image is recorded. ● To check how the image looks before recording, press the recording start/stop button halfway and hold. The indicator appears and stops blinking when the captured image is focused. To record it on the recording medium, press the recording start/stop button fully. MasterPage: Basic_Right GZ-MC100US. book Page 23 Thursday, November 25, 2004 10:44 AM BASIC OPERATIONS EN 23 Still Image Playback MODE INFO Zoom Lever Slide Show You can playback all the images stored in recording media automatically. 1 Perform steps 1 – 2 in the left column. 2 Press 49 to start the slide show. 3 Lock Button Power Switch 49 To display the next image Normal Playback To display the previous image 5 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. ● A still image is displayed. ● To switch the medium to be played back, see pages 26 and 27. . Slide Show Deleting Still Image Files ● You can select the desired file to be deleted by pressing w e. ● To delete multiple files at once, see pages 26 and 29. 3 Press 3 to display the previous file. Press 5 to display the next file. To turn on/off the on-screen display / To check the file information Press INFO repeatedly. To select the file on the index display Slide the zoom lever to W so that the index display appears. Then press rtw e to select the file and press 49. Press 49. , then press rt to select [EXECUTE] and press NOTES: ● Images shot and stored on the recording media with another device may not be played back correctly. 32) BASIC OPERATIONS ● If you press t during the slide show, files are displayed in descending order. ● If you press r during the slide show, files are displayed in ascending order. ● To end the slide show, press 49 again. MasterPage: Body_Left GZ-MC100US. book Page 24 Thursday, November 25, 2004 10:44 AM 24 EN BASIC OPERATIONS Voice Recording MODE Zoom Lever Recording Start/Stop Button Voice Playback 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. ● To change the playback speed, see pages 26 and 30. ● To switch the medium to be played back, see pages 26 and 27. . 3 2 Lock Button Power Switch 49 3 Press 49 to start playback. 4 To pause playback, press 49 again. To adjust the speaker volume During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume. To check the file information Press INFO when playback is paused. 6 5 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select ● The camera is programmed to record voice on the medium in the CF slot by the factory preset. [. . . ] If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole. Keep it away from direct sunlight. Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer. When requesting repairs for malfunctioning by your dealer or JVC service center, be sure to bring your camera together with the removable hard disk. If one of them is not included, the cause cannot be diagnosed, and the repair cannot be made properly. [. . . ]