User manual JVC GR-DVX70

[. . . ] DIGITAL VIDEO CAMERA GR-DVX70 ENGLISH Please visit our CyberCam Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/english/index-e. html INSTRUCTIONS LYT0412-001A EN 2 EN Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual ·All major sections and subsections are listed in the Table Of Contents ( pg. ·Basic and advanced features/operation are separated for easier reference. They contain extremely important information regarding the safe use of this product. [. . . ] 82). FEATURE: Playback Zoom Available only with the RM-V713U remote control (provided) ( pg. 82). FEATURE: Playback Special Effects Available only with the RM-V713U remote control (provided) ( pg. 83). 54 EN PLAYBACK Advanced Features For Video Playback Menu The Playback Menu allows you to set the following functions: Playback Sound (32 kHz, 48 kHz), Synchro Comp, Indication, Display and Time Code. 88, 89). 1 SELECT OPERATION MODE Lock Button Set the Power Switch to " " while pressing down the Lock Button. Rotate MENU/SET to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press MENU/SET, and the highlight bar automatically moves to "END". ·To set parameters for other functions, repeat steps 3 and 4. PLAY /P CA C OFF MER Power lamp 2 ACCESS PLAYBACK MENU 3 SELECT FUNCTION Y PLA 4 SET FUNCTION PARAMETERS FULL SOUND SOUND1 SOUND2 FULL SOUND SOUND1 SOUND2 ON OFF ON OFF ON OFF MENU/SET Dial Display 48kHz MODE 32kHz MODE SYNCHRO INDICATION DISPLAY TIMECODE 4 END FULL SOUND SOUND1 0. 0 ON ON OFF Playback Menu 4 48kHz MODE 32kHz MODE SYNCHRO INDICATION DISPLAY TIMECODE END FULL SOUND SOUND1 0. 0 ON ON OFF S DSC DSC A5 Power Switch 5 CLOSE MENU Press MENU/SET again, and the menu disappears. EN55 Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. (32 kHz is preset to "SOUND 1" and 48 kHz is preset to "FULL SOUND". ) Recording sound 32 kHz Display FULL SOUND SOUND 1 SOUND 2 FULL SOUND 48 kHz SOUND 1 SOUND 2 Stereo sound "L" sound is output on both channels "R" sound is output on both channels Stereo sound Output sound When watching a tape recorded at 32 kHz, if you want to change the output sound, access the Playback Menu and, in step 3 on page 54, select "32 kHz MODE" and set it for "FULL SOUND", "SOUND 1" or "SOUND 2". When playing back a tape recorded at 48 kHz, set in the same manner. NOTES: You can also use the provided RM-V713U remote control's AUDIO MONITOR button to change the output sound (without having to access the Playback Menu). Make sure you point the remote control at the camcorder 's remote sensor. During playback, the camcorder detects the sound mode in which the recording was made. During playback the sound mode is displayed in the upper left corner. Display TIME CODE (Displaying The Time Code During Playback) You can display the Time Code on screen during playback. To turn it on, select "TIME CODE" at the Playback Menu and change the setting ( pg. OFF­ The Time Code does not appear. TC 12 : 34 : 24 DEC 25 ' 98 PM 5 : 30 Frames* Seconds Minutes *25 frames = 1 second DISPLAY (Displaying the Date During Playback) If the time has been set, the date is automatically recorded separately from the recorded video signal. To turn it off, select "DISPLAY" at the Playback Menu and change the setting ( pg. OFF­ The date is not displayed. INDICATION TC 12 : 34 : 24 25 . 99 16 : 40 32kHz/SOUND1 You can make the Playback Sound, Time Code and Date indications disappear. This function overrides the "TIME CODE" and "DISPLAY" settings in the Playback Menu. To turn it off, select "INDICATION" in the Playback Menu and change the setting ( pg. OFF­ The Playback Sound, Time Code and Date indications do not appear on the Playback Screen. ON­ The Playback Sound, Time Code and Date indications are displayed according to how "TIME CODE" and "DISPLAY" are set in the Playback Menu. TC 12 : 34 : 24 25 . 99 16 : 40 NOTE: If "INDICATION" is set in the Date/Time Menu, "INDICATION" in the Playback Menu will also be set to the same setting ( pg. [. . . ] in places where humidity is extremely low (below 35%) or extremely high (above 80%). swing the soft camera case excessively when the camcorder is inside it. Dirty heads can cause the following problems: About moisture condensation . You have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass` outer surface. [. . . ]