User manual JVC GR-DVM1

[. . . ] The serial numbers are located on the bottom of the GR-DVM1U and the AA-V80U. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. ⷠBasic and advanced features/operation are separated for easier reference. They contain extremely important information regarding the safe use of your new camcorder. [. . . ] To use effects that don't appear in the menu, exchange them ( pg. The Picture Wipe/Dissolve feature is not available when Random Fader is activated. You can replace the 5 effects currently appearing in the menu with 5 others. Turn the Power Dial to "REC" while pressing down the lock button located on the dial, and set the shooting mode selector to "MANUAL". Cycle through the remaining effects by pressing the ­/+ button and stop when the one you want is displayed. Place the pointer next to "TO FADER/WIPE MENU" by pressing the ­/+ button, then press MENU. Place the pointer next to the number of the effect you want to replace by pressing the ­/+ button, then press MENU. Selection is complete, and you can use the new effects during recording ( pg. To use the exchanged FADE/WIPE effects, refer to the following pages: You can choose any one of the effects from the P. In addition, you can exchange 5 of the 13 options that appear for other available effects ( pg. Turn the Power Dial to "REC" while pressing down the lock button located on the dial, and set the shooting mode selector to "MANUAL". Used together with the Wide Cinema function, it enhances the "classic film" effect. Adds a "ghost" to the subject, giving your recording a "fantasy" feeling. 1/60­Normally, when recording images from an NTSC TV, a black band appears. 1/100­When used in areas where the AC is 50 Hz, and when shooting under flourescent or mercury lighting, the picture may flicker. You can light dark subjects or areas even brighter than they would be under good natural lighting. You can replace 5 of the effects that appear in the menu with 5 others. Turn the Power Dial to "REC" while pressing down the lock button located on the dial, and set the shooting mode selector to "MANUAL". Place the pointer next to the number of the effect you want to replace by pressing the ­/+ button, then press MENU. Cycle through the remaining effects by pressing the ­/+ button and stop when the one you want is displayed. Selection is finished, and you can use the new effect(s) in recording ( pg. You must first set the date and time (see "Date/Time Settings" pg. [. . . ] After the camcorder plays back for about 20 seconds, it stops automatically. If, after using the Cleaning Cassette, the problems still exist, consult your nearest JVC dealer. While using the camcorder, the surface around the LCD monitor and/or the back of the LCD monitor may heat up. ⷠIf you leave power on for a long time, the surface around the LCD monitor becomes hot. [. . . ]