User manual JVC GR-DVL505U

[. . . ] If nonetheless the mains plug is cut off be sure to remove the fuse and dispose of the plug immediately, to avoid possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below: DO NOT make any connection to the Larger Terminal coded E or Green. The wires in the mains lead are coloured in accordance with the following code: Blue to N (Neutral) or Black Brown to L (Live) or Red If these colours do not correspond with the terminal identifications of your plug, connect as follows: Blue wire to terminal coded N (Neutral) or coloured black. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. [. . . ] To prevent this, use of a tripod is recommended. 2 Press the Recording Start/Stop Button to start video recording or SNAPSHOT to shoot a still image. NOTES: Be careful not to point the LED Light directly to eyes. If the light does not reach the subject, the Night-Scope function will be activated, and makes it possible to shoot the subject brighter. There is a difference in the brightness of the images shot between the centre area which is illuminated by the LED Light and the surrounding areas (which will be darker). Since subjects are shot at a reduced shutter speed when the White LED Light setting is "ON", they will appear slightly blurred. FEATURES FOR RECORDING EN SNAPSHOT MMENU/VOL. Power Switch Lock Button 19 WIPE­CORNER: Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen. WIPE­WINDOW: The scene starts in the centre of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the centre. WIPE­SLIDE: Wipe in from right to left, or wipe out from left to right. WIPE­DOOR: Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene. WIPE­SCROLL: The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen. WIPE­SHUTTER: Wipe in from the centre of a black screen toward the top and bottom, or wipe out from the top and bottom toward the centre leaving a black screen. Wipe Or Fader Effects IMPORTANT: Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. (See the right column. ) If an unusable Wipe/Fader Effect is selected, its indicator blinks in blue or goes out. Program AE With Special Effects IMPORTANT: Some modes of Program AE with special effects cannot be used with certain Wipe/Fader effects. The "O" indication appears and a still image will be recorded for approx. Regardless of the Power Switch position ("A" or "M"), Snapshot recording takes place using the selected Snapshot mode. 15), the "O" indication blinks in blue and Snapshot recording becomes impossible. 19) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. If SNAPSHOT is pressed when "DIS" is set to "ON" ( pg. During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image. NOTES: FEATURES FOR RECORDING EN FOCUS SNAPSHOT 21 Manual Focus NOTE: If you are using the viewfinder, you should already have performed "Viewfinder Adjustment" ( pg. 8). MMENU/VOL. 1 Set the Power Switch to "M" Lock Button while pressing down the Lock Button located on the switch. While focusing on a further subject 2 Press FOCUS. The manual focus indicator appears. 3 To focus on a further subject, Power Switch rotate the MMENU/VOL. To reset to Auto Focus Press FOCUS twice or set the Power Switch to "A". If FOCUS is pressed once, the camcorder will enter the focus adjustment mode again. Manual focus indicator While focusing on a nearer subject Auto Focus The camcorder's Full Range AF system offers continuous shooting ability from close-up (as close as approx. [. . . ] 12) (The level indicator g moves. ) BRIGHT : Brightness Control Indicator (LCD monitor/ Viewfinder) ( pg. 16, 17) TERMS EN 39 A AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7 Auto Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Auto Shut Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 27 N Night-Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Power Switch Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Priority Setting (PRIORITY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]