User manual JVC GR-DVL40

[. . . ] ENGLISH CONTENTS SAFETY PRECAUTIONS PROVIDED ACCESSORIES GETTING STARTED 2­4 5 6 ­ 11 DIGITAL VIDEO CAMERA GR-DVL40 GR-DVL30 GR-DVL20 Please visit our CyberCam Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/english/index-e. html Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 RECORDING 12 ­ 28 Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PLAYBACK 29 ­ 35 29 30 32 34 Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Advanced Connections . . . . . . . . . . . . . . . . . . . . . . . TAPE DUBBING 36 ­ 37 Tape Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 40, 41). NOTES: If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to "OFF", then to " ". The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. You can also view the playback picture on the LCD monitor with it flipped over and retracted. LCD monitor/viewfinder indications: ·When power is supplied from a battery: the " " battery pack remaining power indicator is displayed. When power is supplied through the DC cord: " " does not appear. Only a blue screen is displayed. PLAYBACK 30 EN MENU/BRIGHT Dial PLAYBACK Advanced Features Playback Menu The Playback Menu allows you to set the following functions: Playback Sound (32 kHz, 48 kHz), Synchro Comp, Indication, Display and Time Code. 46, 47). Power Switch Display 4 48kHz MODE 32kHz MODE SYNCHRO INDICATION DISPLAY TIME CODE END 1 2 3 4 5 FULL SOUND SOUND1 SOUND2 FULL SOUND SOUND1 SOUND2 ON OFF ON OFF ON OFF Set the Power Switch to " ". Press MENU/BRIGHT. Move the highlight bar to the desired function by rotating MENU/BRIGHT. Then press MENU/BRIGHT, and the highlight bar automatically moves to "END". The menu disappears. Playback Menu FULL SOUND SOUND1 0. 0 ON ON OFF 48kHz MODE 32kHz MODE SYNCHRO INDICATION DISPLAY TIME CODE 4 END FULL SOUND SOUND1 0. 0 ON ON OFF EN31 Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. (32 kHz is preset to "SOUND 1" and 48 kHz is preset to "FULL SOUND". ) Recording sound Display FULL SOUND 32 kHz SOUND 1 SOUND 2 FULL SOUND 48 kHz SOUND 1 SOUND 2 Stereo sound "L" sound is output on both channels "R" sound is output on both channels Stereo sound Output sound If you want to change the output sound of a tape recorded at 32 kHz, access the Playback Menu and, in step 3 on page 30, select "32 kHz MODE" and set it for "FULL SOUND", "SOUND 1" or "SOUND 2". NOTES: You can also use the provided RM-V711U remote control's AUDIO MONITOR button to change the output sound (without having to access the Playback Menu). Make sure you point the remote control at the camcorder's remote sensor. The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner. INDICATION You can make the playback sound, time code and date indications disappear. This function overrides the "TIME CODE" and "DISPLAY" settings in the Playback Menu. To change this setting, select "INDICATION" in the Playback Menu ( pg. OFF­ The playback sound, time code and date indications do not appear on the Playback Screen. ON­ The playback sound, time code and date indications are displayed according to how "TIME CODE" and "DISPLAY" are set in the Playback Menu (factory preset). NOTE: If "INDICATION" is set in the Date/Time Menu, "INDICATION" in the Playback Menu will also be set to the same setting ( pg. 99 16 : 40 DISPLAY (Displaying the Date During Playback) If the time has been set, the date is automatically recorded separately from the recorded video signal. [. . . ] 31) 6 Displays the time code. Warning Indications Indications Displays the battery remaining power. Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks. Appears when no tape is loaded, or when the erase protection tab is set to "SAVE". When this indication is displayed, the camcorder turns off automatically. TAPE! [. . . ]