User manual JVC GR-DVL355

[. . . ] You may install and use the Program on a HDD or other storage devices incorporated in Your PC. (2) You may make one (1) copy of the Program solely for your personal backup or archival purposes. 3 RESTRICTION ON THE PROGRAM (1) You may not reverse engineer, decompile, disassemble, revise or modify the Program, except to the extent that expressly permitted by applicable law. (2) You may not copy or use the Program, in whole or in part, other than as expressly specified in this Agreement. (3) You have no right to grant a license to use the Program, and may not distribute, rent, lease or transfer the Program to any third party or otherwise let them use the Program. 4 LIMITED WARRANTY JVC warrants that any media in which the Program is embodied are free from any defects in materials and workmanship for a period of thirty (30) days from the date of Your purchasing any our products accompanying the Program. [. . . ] 8). ImageMixer with VCD 1. 1 This application is used to capture still images and video clips from a camcorder through a USB connector or IEEE1394 (i. LINK) connector, and is also used to manage and edit the still images and video clips, and to create Video CDs. Digital Photo Navigator 1. 0 This application is used to capture still images and convert them into a variety of formats. G. 726 decoder This is an audio decoder for video clips created by the camcorder (extension ". asf"). NOTE: Install G. 726 decoder only when the camcorder is equipped with E-Mail Clip Recording function. Adobe® Acrobat® Reader 5. 0 This application is used to read PDF files. 1 Load the provided CD-ROM in the PC. After a moment, the [Important Notice] screen appears. If the [Important Notice] screen does not appear, double-click [My Computer] and then double-click the CD-ROM icon. 2 Confirm the contents and then click [Next]. After a moment, the [Setup] screen appears. From the [Setup] screen, you can install the desired driver or software. --5-- CONTINUED ON NEXT PAGE 3 Click [Install] on the right side of the desired software and follow the on screen instructions to complete the installation. The installation of the selected driver or software starts. The following is the example of Digital Photo Navigator on Windows® 98SE. The following is the example of USB Mass Storage Class driver on Windows® 98SE. Then, [Choose Destination Location] screen appears. Click [Finish]. When the installation is finished, [InstallShield Wizard Complete] screen appears. Click [Next]. Click [Finish] and then [Setup] screen reappears. --6-- CONTINUED ON NEXT PAGE [Setup Status] screen appears. Wait for a moment until the installation is finished. When the installation is finished, [Digital Photo Navigator Setup] screen appears and asks you if you want to create the icon on the desktop. If you need it, click [Yes]. If not, click [No]. 4 When the message asking whether it is OK to restart the PC appears, click [Yes]. The PC restarts, and after a moment the [Setup] screen from step 1 appears. 5 Repeat steps 3 and 4 to install all of the desired software. Installing [ImageMixer with VCD 1. 1] When the error message below appears while installing ImageMixer, click [OK] to complete installation. NOTES: The Digital Photo Navigator and ImageMixer with VCD instruction manual is included on the CD-ROM in PDF format. Double-click the [JVC] folder and then double-click the [Docs] folder. You can also use a DV cable instead of a USB cable to capture video from a tape when using ImageMixer. ( "For more detailed information" in the ImageMixer instruction manual on the CD-ROM) Viewing the Contents of a Memory Card (Windows®) 1 Install [USB Mass Storage Class driver]. 5) Windows® Me/2000/XP: There is no need to install this driver. Simply connect the camcorder to the PC with a USB cable, and you can read and write memory cards in the camcorder. 2 Connect the camcorder to the PC with a USB cable. 4 Set the camcorder to the memory card playback mode. Refer to the camcorder's instruction manual for details. [USB MODE] appears on the camcorder's LCD monitor. 5 Double-click the [My Computer] icon on the desktop. The [Removable Disk] icon which represents the memory card in the camcorder appears in the [My Computer] window. NOTE: Windows® 98/98SE: [Removable Disk] icon does not appear if USB Mass Storage Class driver is not installed properly. In this case, refer to "Updating [Device Manager] (Windows®)" ( pg. 8). 6 Double-click the [Removable Disk] icon. The following folders are automatically created in the memory card. Different file types are stored in different folders. Navigation data Still images DPOF Setting data Video clips Still images (extension ". jpg") Video clips (extension ". asf") DPOF setting data : Folders within the [DCIM] folder : Folders within the [DCVI] folder The [DCVI] folder is displayed only when the camcorder is equipped with E-Mail Clip Recording function. : Folders within the [MISC] folder -- 10 -- CONTINUED ON NEXT PAGE Navigation data : Folders within the [NAVI] folder The [NAVI] folder is displayed only when the camcorder is equipped with NAVIGATION function. NOTES: Saving the wrong kinds of files in a memory card or deleting files or folders from a memory card can cause problems with the operation of the camcorder. When it is necessary to delete a file from a memory card, delete it through the camcorder. [. . . ] 6 Set the Power Switch on the camcorder to "OFF". The camcorder turns off. Title converter Facility (Macintosh) Video images from the camcorder can be converted into title files for use by camcorder. -- 13 -- Connections (Macintosh) Connect the USB cable to copy still image and video clip files in a memory card to the PC or to use ImageMixer in capturing video. PC To USB connector To USB connector Camcorder USB cable 1 To assure safety, make sure all units are turned off before making any connections. 2 Use the USB cable to connect the camcorder to the PC. We recommend that you use the AC Adapter. NOTES: When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY (DSC) mode on the camcorder causes malfunctions of the PC. [. . . ]