User manual JVC GR-DVL300EK INSTALLATION MANUAL

[. . . ] JVC's entire liability and your exclusive remedy in connection with the Program shall be, at JVC's option, either (a) return of the price paid, or (b) replacement of defective Program media. 6 DISCLAIMER OF WARRANTIES EXCEPT FOR THE EXPRESS WARRANTIES STATED HEREIN AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, JVC AND ITS SUPPLIERS DISCLAIM ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN REGARD TO THE PROGRAM AND THE ACCOMPANYING PRINTED MATERIALS. 7 LIMITED LIABILITY TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL JVC AND ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT, TORT, STRICT PRODUCT LIABILITY OR OTHERWISE (INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF JVC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Victor Company of Japan, Limited CAUTION: Operate this equipment according to the operating procedures described in this manual. Changes or modifications not approved by JVC could void user's authority to operate the equipment. How to handle a CD-ROM Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. [. . . ] The message [ACCESSING FILES] appears on the LCD monitor of the camcorder, and the folder is copied from the memory card to the PC. NOTE: Never disconnect the USB cable while the message [ACCESSING FILES] is displayed on the camcorder's LCD monitor. Playing Back Files on the PC (Windows®) Still images Use an application that can handle the JPEG file format. To view a still image, double-click the still image file (extension ". jpg"). Video clips (Only for the camcorder equipped with E-Mail Clip Recording function) Use the Windows MediaTM Player (version 6. 4 or later). You can download the Windows MediaTM Player from the Microsoft web site at: http://www. microsoft. com/ If you cannot play back a video clip file (extension ". asf") that you have opened with the Windows MediaTM Player, connect to the Internet and then try opening the file. The software that is needed in order to play back the file will be downloaded automatically, and then the file will be played back. If the video clip plays but without the audio, install the G. 726 decoder from the CD-ROM. --8-- Disconnecting the USB Cable (Windows®) Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off the camcorder. When using Windows® 98/98SE 1 Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor of the camcorder. If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding. 2 Double-click the [My Computer] icon on the desktop. If the camcorder is connected to the PC correctly, the [Removable Disk] icon appears. 3 Right-click the [Removable Disk] icon in the [My Computer] window. A menu appears. 4 Click [Eject] in the menu. The [Removable Disk] icon disappears. If the icon does not disappear, wait for a while, and then proceed to step 5. 5 Disconnect the USB cable. The camcorder turns off. If any message appears, click [OK]. 6 Set the Power Switch on the camcorder to "OFF". --9-- When using Windows® 2000/Me 1 Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor of the camcorder. If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding. 2 Double-click the [Unplug or Eject Hardware] icon in the status bar. The [Unplug or Eject Hardware] dialog box appears. 3 Select [JVC DV Camera Storage] or [USB Disk], and then click [Stop]. Windows® 2000 Windows® Me The [Stop a Hardware device] dialog box appears. 4 Click [OK]. Windows® 2000 Windows® Me The model name depends on the connected camcorder. 5 A message indicating that the device can be safely removed appears. 7 Set the Power Switch on the camcorder to "OFF". The camcorder turns off. -- 10 -- Viewing the Contents of a Memory Card (Macintosh) 1 Connect the camcorder to the PC with a USB cable. 3 Set the camcorder to the memory card playback mode. Refer to the camcorder's instruction manual for details. We recommend that you name the icon to tell it from the other removable disks or folders. Different file types are stored in different folders. Still images Video clips 4 Double-click the memory card icon on the desktop. DPOF setting data Still images (extension ". jpg") Video clips (extension ". asf") DPOF setting data : Folders within the [DCIM] folder : Folders within the [DCVI] folder The [DCVI] folder is displayed only when the camcorder is equipped with E-Mail Clip Recording function and video clips is stored in the memory card. : Folders within the [MISC] folder NOTES: Saving the wrong kinds of files in a memory card or deleting files or folders from a memory card can cause problems with the operation of the camcorder. When it is necessary to delete a file from a memory card, delete it through the camcorder. Never disconnect the USB cable while the message [ACCESSING FILES] is displayed on the camcorder's LCD monitor. If you are using a brand new memory card, you need to initialize the memory card with the camcorder first. You may not be able to copy files from the memory card to the PC without doing so. -- 11 -- Copying Files to the PC (Macintosh) Still image and video clip files that are stored in a memory card can be copied to the PC and played back on the PC. 1 Double-click the memory card icon on the desktop. The folders in the memory card appear. 2 Double-click the destination folder. 3 Select the folder to be copied, and then drag and drop that folder in the destination folder. To copy still images: Copy the folder within the [DCIM] folder. The message [ACCESSING FILES] appears on the LCD monitor of the camcorder, and the folder is copied from the memory card to the PC. NOTE: Never disconnect the USB cable while the message [ACCESSING FILES] is displayed on the camcorder's LCD monitor. Playing Back Files on the PC (Macintosh) Still images Use an application that can handle the JPEG file format. To view a still image, either double-click the still image file (extension ". jpg"), or drag and drop the file on the application icon. Video clips (Only for the camcorder equipped with E-Mail Clip Recording function) Use the Windows MediaTM Player for Mac (version 6. 4 or later). You can download the Windows MediaTM Player for Mac from the Microsoft web site at: http://www. microsoft. com/ Disconnecting the USB cable (Macintosh) Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off the camcorder. 1 Drop the memory card icon on the desktop into the [Trash] icon. If the confirmation message appears, click [OK]. 2 Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor of the camcorder. If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding. 3 Disconnect the USB cable. 4 Set the Power Switch on the camcorder to "OFF". The camcorder turns off. -- 12 -- Mr. [. . . ] (67 MB for the software, and a minimum of 60 MB to be used as virtual memory for efficient use of the program. ) Recommended Equipment A sound card and a microphone. Photo 3 and ImageFolio. 1 2 3 4 Insert the program CD into your CD-ROM drive. The installation program will automatically detect the language being used in the version of Windows you are running. Follow the instructions on your screen as they appear. NOTE: When you install the program, you can choose to install Adobe Acrobat Reader if you don't have it installed. [. . . ]