User manual JVC GR-D366EK

[. . . ] (2) You may make one (1) copy of the Program solely for your personal backup or archival purposes. 5 3 RESTRICTION ON THE PROGRAM (1) You may not reverse engineer, decompile, disassemble, revise or modify the Program, except to the extent that expressly permitted by applicable law. (2) You may not copy or use the Program, in whole or in part, other than as expressly specified in this Agreement. (3) You have no right to grant a license to use the Program, and may not --3-- JVC warrants that any media in which the Program is embodied are free from any defects in materials and workmanship for a period of thirty (30) days from the date of Your purchasing any our products accompanying the Program. JVC's entire liability and your exclusive remedy in connection with the Program shall be replacement of such defective media. [. . . ] You can find the latest information (in English) on the provided software program at our world wide web server at http://www. jvc-victor. co. jp/english/ index-e. html PC CPU OS Memory Available Hard Disk Space MB MB Please note that it may take some time to respond to your questions, depending on their subject matter. JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifications or performance of the OS, other applications or drivers. --5-- System Requirements Windows® The following requirements must be satisfied to connect a camcorder to a PC and to use Digital Photo Navigator. OS: Windows® Millennium Edition (Me) (pre-installed), Windows® 2000 Professional (2000) (pre-installed), Windows® XP Home Edition (XP) (pre-installed), or Windows® XP Professional (XP) (preinstalled) CPU: Intel® MMXTM Pentium®, at least 200 MHz RAM: At least 64 MB Free hard disk space: At least 10 MB for installation, at least 500 MB recommended Connector: USB connector Display: Must be capable of displaying 800 x 600 dots with 16-bit colour Miscellaneous: Internet Explorer 5. 5 or later Corporation in the United States and/or other countries. Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders. Macintosh The following requirements must be satisfied to connect a camcorder to a PC. Hardware: iMac, iBook, Power Mac G4 or G5, PowerBook G3 or G4, eMac, Mac Mini equipped with a USB connector OS: Mac OS X (10. 1. 5, 10. 2. 1 to 10. 2. 8, 10. 3. 1 to 10. 3. 9, 10. 4. 2, 10. 4. 3) RAM: At least 128 MB The system requirements information above is not a guarantee that the provided software will work on all personal computers meeting those requirements. If your PC does not meet the system requirements above, you can use the optional USB reader/writer CU-VUSD70, the PC card adapter CU-VPSD60 or the floppy disk adapter CU-VFSD50 to load the files in the memory card to the hard disk on your PC. (Refer to "JVC Accessories" on our world web site at: http://www. jvc-victor. co. jp/ english/accessory/) Windows® are either registered trademarks or trademarks of Microsoft --6-- Software Installation (Windows®) Follow the procedure described below to install the software. (Check that there are no other application icons on the status bar. ) Digital Photo Navigator 1. 5 This application is used to organise still images and convert them into a variety of formats. Wait for a moment until the installation is finished. 1 Load the provided CD-ROM into the PC. 2 Follow the on screen instructions to complete the installation. Following steps are the example of Digital Photo Navigator on Windows® Me. [License Agreement] screen appears. When the installation is finished, [Digital Photo Navigator Setup] screen appears and asks you if you want to create the icon on the desktop. Click [Yes]. Then, [Choose Destination Location] screen appears. If you need it, click [Yes]. NOTE: If you perform installation of a software that is already installed, uninstallation will start. In this case, perform the installation again after uninstallation is finished. Click [Next]. Then, [Select Program Folder] screen appears. --7-- Connecting (Windows®) Connecting the USB cable Connect the USB cable to copy still image files in a memory card to the PC. PC To USB connector To USB connector Camcorder USB cable 1 To assure safety, make sure all 2 units are turned off before making any connections. Use the USB cable to connect the camcorder to the PC. NOTES: It is recommended to use the AC Adapter as the power supply instead of the battery pack. When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY (DSC) mode on the camcorder causes malfunctions of the PC. If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the PC, not through the hub. Do not use an extension USB cable. --8-- Viewing the Contents of a Memory Card (Windows®) 1 Make sure that there is a memory card in the camcorder. 2 Set the camcorder's VIDEO/ 3 MEMORY Switch to "MEMORY". Set the camcorder's Power Switch to "PLAY" while pressing down the Lock Button located on the switch. The camcorder turns on. 2 Double-click the [Removable Disk] icon. 6 The folders in the memory card appear. 4 Connect the camcorder to the PC with a USB cable. 8) On the camcorder's LCD monitor [USB] appears. 5 When using Windows® XP: The [Removable Disk] window appears on the PC's screen after a moment. [. . . ] [DCIM]: Contains folders with still images (extension ". jpg") [MISC]: Contains folders with DPOF setting data -- 13 -- Copying Files to the PC (Macintosh) Still image files that are stored in a memory card can be copied to the PC and played back on the PC. Playing Back Files on the PC (Macintosh) Still Images Use an application that can handle the JPEG file format. To view a still image, either double-click the still image file (extension ". jpg"), or drag and drop the file on the application icon. 1 Double-click the memory card icon on the desktop. The folders in the memory card appear. 2 Create a new folder, enter the 3 folder name, and then doubleclick it. Select the folder to be copied, and then drag and drop that folder in the destination folder. To copy still images: Copy the folder within the [DCIM] folder. NOTE: Never disconnect the USB cable while " " is displayed on the camcorder's LCD monitor. -- 14 -- Disconnecting the USB cable (Macintosh) Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off the camcorder. User's Guide/Help/Readme (Windows®) This manual only refers to software installation and PC connection. [. . . ]