User manual JVC GC-QX5HDU

[. . . ] DIGITAL STILL CAMERA GC-QX3HD/ GC-QX5HD ENGLISH STILL CAMERA For Customer Use: INSTRUCTIONS Enter below the Model No. Serial No. LYT0668-001B 2 EN Dear Customer, Thank you for purchasing the Digital Still Camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new Digital Still Camera. The AA-V37 AC Power Adapter should be used with: AC 120 V`, 60 Hz in the USA and Canada, AC 110 – 240 V`, 50/60 Hz in other countries. [. . . ] Do not move the object and the camera until the shooting finishes completely. ● It is not possible to use the flash. O 4 FF M V EN 49 Installing the Film Copying Adapter (GC-QX5HD only) By installing the provided film copying adapter, you can take photos of images from developed 35mm film (negatives or positives; only those with sleeves). For details on shooting film, refer to page 50. 5 , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 4 3 Film copying adapter (provided) 1 2 Film holder (provided) Compatible with a film including six or less frames 1 2 3 4 5 Grasp knobs and open. Insert the film holder into the slit in the film copying adapter with the picture side facing the lens side of the camera. •Align on the both sides of the frame with the self timer lamp, and then push the unit all of the way to the back of the lens section. NOTES: ● The film copying adapter is not compatible with APS film and strips of film that include seven or more frames. ● When shooting, secure the camera on a stable surface (such as a desk). ● We recommend using video lights, etc. , behind the film copying adapter. ● Refer to the step 7 on page 50 for the blue film provided with the film holder. 50 EN MANUAL SHOOTING (cont. ) Shooting Film (Film Copy Mode) (GC-QX5HD only) You can use the film copying adapter (provided; see page 49) to take photos of images already on film. 4 5 3 2 1 M V FILM COPY SETTING FRAME 2032x1536 FINE QUALITY ON Q. EXE CLEAR SET 1 2 3 4 5 Turn the Power dial to “M”. •The camera automatically enters macro mode and the zoom range is restricted. •Move the film holder left or right as needed to adjust the image. •Press the r t w e button repeatedly to cycle through the following modes: FRAME: Selects the size of the picture. REVIEW: Selects whether to display the photographed picture on the LCD. FILM: Selects either negative or positive. 6 Set the light source behind the film copying adapter. •If using a fluorescent light (20 – 40 W) as backlighting, set it about 10 – 20 cm (4" – 8") behind the film. •If using natural light (40 – 100 W) as backlighting, set it about 20 – 30 cm (8" – 12") behind the film. •Be careful when using hot light sources for long periods of time. Heat can easily damage film and picture quality. O 4 FF PRO STILL: Selects the photography mode. CLEAR: Returns to the default settings. EN 51 8 7 10, 11 FILM COPY SETTING FRAME 2032x1536 FINE QUALITY ON Q. BALANCE” and press the w e button to select either “AUTO” or “MWB”. Making calibration settings •For negative film Set the provided blue film on top of an unexposed (all brown) part of the negative and load into the film holder. BALANCE” and then hold down the EXE button until the shoot standby lamp (green) stops flashing and goes out. [. . . ] (“The Warranty Period”) PARTS 1 YR LABOR 90 DAYS THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO. WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. [. . . ]