User manual JVC DR-MV5SUS-DR-MV5 Instruction Manual

[. . . ] DVD VIDEO RECORDER & VIDEO CASSETTE RECORDER DR-MV5S STANDBY/ON VHS DVD REC VHS/DVD CH VHS DUBBING DVD DV IN S-VIDEO VIDEO AUDIO For Customer Use: INSTRUCTIONS Enter below the Model No. Serial No. LPT1032-001A 2 EN SAFETY FIRST WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: This unit should be used with AC 120Vd, 60Hz only. Dear Customer, Thank you for purchasing the JVC DVD video recorder & video cassette recorder. Before use, please read the safety information and precautions to ensure safe use of your new unit. Cautions To prevent electric shocks and fire hazards, DO NOT use any other power source. [. . . ] When "RESUME" is changed to "ON" or "OFF" ( pg. 74), resume points of the discs memorized with "RESUME" set to "DISC RESUME" will be cleared. Resume points are memorized for each side of a double-sided disc. 1 Press 9 to pause during playback. 2 Press SLOW ­ (3) or SLOW + (5) to activate frame-byframe playback. Each press of SLOW ­ (3) or SLOW + (5) advances/reverses the still picture frame by frame. Frame-by-frame playback for reverse direction cannot be performed with Video CD discs. To resume normal playback, press 4. Slow Motion Each press of SLOW ­ (3) or SLOW + (5) increases the slow motion speed for each direction (from 1/16 to 1/2 times the normal speed). Slow motion for reverse direction cannot be performed with Video CD discs. 1 Press 9 to pause during playback. 2 Press SLOW ­ (3) or SLOW + (5) for 2 or more seconds. Skip Search During playback, press Each press initiates an approximately 30-second period of fastmotion playback. Normal playback resumes automatically. . ADVANCED PLAYBACK EN 47 Marking Positions To Play Back Again Later 8 Video CD/Audio CD During playback Current track elapsed time ] Current track remaining time ] Total elapsed time ] Total remaining time ] (back to the beginning) In stop mode 0:00 ] Playback time of track 1 ] 0:00 ] Total length of a disc ] (back to the beginning) NOTE: When a PBC-compatible Video CD disc is loaded, deactivate the PBC function. 48) It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto DVD-RAM/RW (VR mode only) discs when recording is helpful to locate a start point when you play back the discs later. To mark positions: During playback, press MARK at positions you want to mark. Angle Selection "MARK" appears on the TV screen. You can easily locate the marked positions using 2 or 6 when you play back the disc. To delete the marked positions: While paused, press 2 or 6 to locate a marked position you want to delete, then press MARK. Crossed "MARK" appears on the TV screen, and the marked position is deleted. You can enjoy a variety of scene angles if a DVD VIDEO disc contains "multi-angle" parts, where the same scene was shot from different angles. If the disc contains "multi-angle" parts, " " appears on the TV screen at the beginning of the "multi-angle" part. 1 Press ANGLE during playback. The angle selection display appears on the TV screen. NOTES: When a monaural program changes to a stereo program while recording, a mark signal is automatically recorded. Titles will be divided into "chapters" at the marked points according to the disc types as follows: DVD-R/RW (Video mode): After finalizing, titles are divided into "chapters" at the marked points that are marked automatically approximately every 5 minutes during recording before finalizing. 79) DVD-RW (VR mode): After finalizing, titles are divided into "chapters" at the marked points that are marked at the desired locations during playback before finalizing. 79) DVD-RAM: Titles are divided into "chapters" at the marked points that are marked at the desired locations during playback. DVD VIDEO and finalized disc: Creating of marked points are not permitted. 2 Press ANGLE or w e to select your desired angle. When 3 scene angles are contained. Each time you press ANGLE or w e, the angle changes. When "X" appears on the TV screen, the current scene is not recorded from multiple angles. In addition, the angle selection display disappears automatically if no operation is done for 10 seconds. Subtitle Selection Checking The Time Information Some DVD VIDEO discs contain more than one subtitle language, from among which you can choose the desired subtitle language. " " appears on the TV screen at the beginning of the part where more than one subtitle language are recorded. You can check time information of a disc on the front display panel and the TV screen. Each press of DISPLAY changes the display as follows: 8 DVD-RAM/DVD-R/DVD-RW During recording Clock time (front display panel only) ] Current title elapsed time ] Disc remaining time* ] (back to the beginning) * only discs before finalizing 1 Press SUBTITLE during Each time you press SUBTITLE, the subtitle display is switched on and off. playback. [. . . ] 47 E Elapsed Recording Time Indication . . . . . . . . . . . . . . . . . . . . . . . 59, 61 F File Structure Of Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Free Rate Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 G Guide Channel Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 T Tape Remaining Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]