User manual JVC DLA-HD350BU

[. . . ] ENGLISH FRANÇAIS ESPAÑOL/CASTELLANO Getting Started INSTRUCTIONS MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES D-ILA PROJECTOR PROJECTEUR D-ILA PROYECTOR D-ILA DLA-HD350 DLA-HD350 1108TTH-AO-AO DLA-HD350 Preparation D-ILA PROJECTOR PROJECTEUR D-ILA PROYECTOR D-ILA Basic Operation Settings Troubleshooting For Customer use : Enter below the serial No. DLA-HD350 Pour utilisation par le client : Entrer ci-dessous le N° de série qui est situé sous le boîtier. N° de modèle DLA-HD350 N° de série Instrucción para el cliente : Introduzca a continuación el nº de serie que aparece en la parte inferior lateral de la caja. Modelo Nº DLA-HD350 Nº de serie Others © 2008 Victor Company of Japan, Limited Serial No. PB006586699-1 1 Getting started Safety Precautions IMPORTANT INFORMATION This product has a High Intensity Discharge (HID) lamp that contains mercury. [. . . ] (Lighten) –50 to 50 (Darken) 05 Tint Adjusts the hue of the projected image. (Red) –50 to 50 (Green) Preparation Basic Operation ● “Contrast”, “Brightness”, “Color” and “Tint” can also be configured from the remote control. ( P16) Settings Troubleshooting Others 29 4 Settings Setting Menu (Continued) Picture Adjust > Color Temp. 5800K 6500K 7500K 9300K High Bright Select this to give a reddish tinge to the image. Gain (Bright part) Custom 1 Offset (Dark part) Red Blue Red Blue Red Blue Red Blue Red Blue Red Blue (Less red) –255 to 0 (More red) (Less blue) –255 to 0 (More blue) (Less red) –50 to 50 (More red) (Less blue) –50 to 50 (More blue) (Less red) –255 to 0 (More red) (Less blue) –255 to 0 (More blue) (Less red) –50 to 50 (More red) (Less blue) –50 to 50 (More blue) (Less red) –255 to 0 (More red) (Less blue) –255 to 0 (More blue) (Less red) –50 to 50 (More red) (Less blue) –50 to 50 (More blue) Green (Less green) –255 to 0 (More green) Only offset can be set. Green (Less green) –50 to 50 (More green) Gain (Bright part) Custom 2 Offset (Dark part) Green (Less green) –255 to 0 (More green) Green (Less green) –50 to 50 (More green) Gain (Bright part) Custom 3 Offset (Dark part) Green (Less green) –255 to 0 (More green) Green (Less green) –50 to 50 (More green) ● The red, green and blue colors can be adjusted and registered respectively. ( P16) 30 ENGLISH Getting Started Picture Adjust > Gamma 07 Gamma Sets the gradation characteristics of the projected image. Three different kinds of gamma can be set according to your preferences. Correction Value The coefficient (1. 8 to 2. 6) of the gamma curve can be selected. Gamma adjustment cannot be performed, and only copy is valid. Preparation Custom 1 Custom 2 Custom 3 (Gamma Setup) The gamma curve for the colors (Red, Green, Blue) can be adjusted Gamma separately. Adjustment* Adjusting “White” will adjust for all “Red, Green, Blue” values. Return the gamma coefficients to the values 2. 2 set by “Correction Value”. Basic Operation ● “Normal” is suitable for normal circumstances but other settings can be selected according to your preferences. ( * “Gamma Adjustment” P16) ① ② Select the reference gamma curve coefficient (1. 8 ～ 2. 6) in “Correction Value”. Select the color to be adjusted in the gamma adjustment screen. Picture Adjust > Gamma Normal A B C Costom1 Costom2 Costom3 Correction Value 1023 White Red Green Blue 512 Copy Paste Reset 0 50 100(%) Settings 2. 2 Exit MENU Select Operate Back BACK ③ Adjust the gamma curve in the gamma curve adjustment screen. Picture Adjust > Picture Adjust Troubleshooting Gamma Normal A B C Costom1 Costom2 Costom3 Correction Value 1023 White Red Green Blue 512 Copy Paste Reset Input: 10% Output:100 Exit MENU > Gamma Normal A B C Costom1 Costom2 Costom3 Correction Value 1023 White Red Green Blue 512 Copy Paste Reset Input: 50% Output: 580 Exit MENU 2. 2 2. 2 0 50 100(%) 0 50 100(%) Select Back Operate Back BACK Select Back Operate Back BACK Select the point where the gradation (brightness) is to be adjusted with the / buttons. Adjust the gradation (brightness) with the / buttons. ④ To end BACK BACK Save gamma data?Yes No OK Others ● If gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able to revert back to its original form. In that case, select “Reset”. 31 4 Settings Setting Menu (Continued) Picture Adjust 08 Advanced Adjusts the contours of the image and detailed composition of the image. Sharpness Sharpness Detail Enhancement RNR NR* MNR BNR Off CTI* Low Middle High 09 Lens Aperture 1 Lens Aperture 10 Reset Reset the setting. (Soft) 0 to 100 (Sharp) (Soft) –50 to 50 (Strong) (Soft) 0 to 16 (Strong) (Soft) 0 to 16 (Strong) On Off Adjusts the outline of image. Input signal remains unchanged. ● Abbreviations NR: Noise Reduction RNR: Random Noise Reduction MNR: Mosquito Noise Reduction BNR: Block Noise Reduction CTI: Color Transient Improvement 32 ENGLISH Getting Started Input Signal > HDMI 11 HDMI Configures HDMI input signal. Auto Input Standard Enhanced Auto Color Space YCbCr(4:4:4) YCbCr(4:2:2) RGB Control with HDMI On Off Automatically configures the input signals. Disables CEC communications. Preparation Basic Operation ● The setting is available only if the HDMI terminal is selected. ● Abbreviation CEC: Consumer Electronics Control Input Signal > COMP. 12 COMP. Configures the input signal for the component video input terminals. [. . . ] Pay attention to the following as the cabinet may deteriorate in condition or paint may come off. If dirt is allowed to accumulate in the air inlets, the internal temperature cannot be adjusted and this may cause a malfunction. Dirt on the cabinet When Unit is Unused for a Long Time Prolonged disuse of the unit may effect an error on the functions. Turn on the power occasionally and operate the unit. ● Use a vacuum cleaner to suck up the dirt. Otherwise, use a Dirt on the lens Dirt in the air inlets Usage Environment ● Avoid direct exposure of screen to direct sunlight and illumination. [. . . ]