User manual JVC CS-V6937

[. . . ] As a start, we recommend you to use the AUTO mode setting A for recording. If you haven't used your camcorder for awhile, the heads may be dirty. Play back your trial recording to make sure the video and audio have been recorded properly. If you haven't used your camcorder for awhile, the heads may be dirty. [. . . ] Accurate stabilization may not be possible if hand shake is excessive, or depending on the shooting condition. DIS cannot be activated when "NIGHT" in "PROGRAM AE", or "STROBE" in "EFFECT" is selected or when LIGHT is set to on or when SNAPSHOT is pressed. Allows you to shoot dark scenes with no picture brightness adjustment. Shooting a subject in low or poor lighting at slow shutter speed provides a brighter image than in the AGC mode, but the subject's movements are not smooth or natural. While the shutter speed is being automatically adjusted, " " is displayed. )]/STANDARD ( ) [FINE ( The Image Quality mode can be selected to best match your needs. Number of storable images, ( 23) [SP]: To record in the SP (Standard Play) mode. Note: During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound. 16BIT: Enables video recording of stereo sound on two separate channels. When Snapshot recording is performed, (Tape): Still images are recorded only onto the tape. / (Tape/Card): Still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels). The moving pictures are divided into four They are recorded or played back for 1. If the light does not reach the subject when the LED Light setting is "ON", the NightAlive function will be activated, and makes it possible to shoot the subject brighter. Since subjects are shot at a reduced shutter speed when the LED Light setting is "ON", they will appear slightly blurred. This feature lets you record still images that look like photographs onto a tape. This feature is useful for recording or playing back precious or hard-to-see moments at a slow speed. If the image taken by snapshot is too dark or too bright, select ( 36) or "SPOTLIGHT" ( 38). Keeping SNAPSHOT pressed in step 5 provides an effect similar to serial photography. The camcorder's Full Range AF system offers continuous shooting ability from close-up (as close as approx. However, correct focus may not be obtained depending on the shooting condition. When shooting using reverse lighting or when the background is too bright. When shooting on a reflective natural background such as at the beach or when skiing. [. . . ] To properly use and store your memory cards, be sure to read the following cautions: Make sure the memory card bears the SD or MultiMediaCard mark. While the memory card is being accessed (during recording, playback, deletion, initialization, etc. Where they won't be exposed to strong magnetic fields (such as those generated by motors, transformers or magnets). Take care not to soil or scratch the mirror surface (opposite to the printed surface). [. . . ]