User manual JVC CS-AW8040

[. . . ] Temperature inside the car : If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. How to reset your unit Be careful not to drop the disc when it ejects. About discs Canceling the display demonstration 4 Setting the clock 5 Basic operations 6 Listening to the radio 8 Listening to a disc 9 Connecting the other external components 9 Listening to the other external components 10 Listening to a USB device 11 Listening to an iPod/iPhone Cleaning the unit Wipe off the dirt on the panel with a dry silicon or soft cloth. Cleaning the connector Wipe off dirt on the connector of the unit and panel. [. . . ] REPEAT TRACK RPT : Repeats current track FOLDER RPT : Repeats current folder RANDOM FOLDER RND : Randomly plays all tracks of current folder, then tracks of next folders ALL RND : Randomly plays all tracks To cancel repeat play or random play, select "RPT OFF" or "RND OFF. You can connect an external component to the auxiliary input jack on the control panel (F-AUX) and/or on the rear side of the unit (R-AUX). Summary of using the external components through the auxiliary input jacks: External component Portable audio player Bluetooth device Preparation Connecting Auxiliary Source cable/device Menu setting Subinput jack name Setting (not supplied) item item Front SRC SELECT F-AUX ON F-AUX See below. Recommended to use a 3-terminal plug head stereo mini plug for optimum audio output. Listening to the other external components Turn on the connected component and start playing the source. You can operate the USB device in the same way you operate the files on a disc. (page 8) · This unit can play MP3/WMA files stored in a USB mass storage class device (such as a USB memory, Digital Audio Player, etc. All tracks will be played repeatedly until you change the source or disconnect the USB device. In this case, disconnect the USB device then reset this unit and the USB device. This unit may not play back files in a USB device properly when using a USB extension cord. ⷠUSB devices equipped with special functions such as data security functions cannot be used with the unit. ") This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to any other than <DIMMER AUTO>. ON : Boost low and high frequencies to produce a well-balanced sound at a low volume level. VOL ADJUST ­05 -- +05 [ 00 ] : Presets the volume adjustment level of each source (except "FM"), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. W LPF *7 LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. TEL MUTING *8 ON : Mutes the sounds while using the cellular phone (not connected through KS-BTA100). AMP GAIN *9 LOW POWER : VOLUME 00 ­ VOLUME 30 (Selects if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. AF-REG *10 AF ON : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received). ) / AF-REG ON : When the currently received signals become weak, the unit switches to another station broadcasting the same programme. ) / WIDE : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. [. . . ] ⷠMaking a call Making a call to the last connected number from your phone. Voice dialing Voice dialing is available only when the connected mobile phone has the voice recognition system. If playback does not start, operate the Bluetooth audio player to start playback. When you turn off the power of the CD receiver, the volume level changes to Normal. [. . . ]