User manual JVC CS-AW6240

[. . . ] If you wish to dispose of this product and the battery, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead. Digital devices (CD/USB) produce very little noise compared with other sources. [. . . ] You can change the PIN code of your choice KS-UBT1 or USB cable from the rear of the unit ] Make sure USB Bluetooth Adapter is connected to one of the USB input terminals. " · For some Bluetooth devices, you may need to enter the PIN code first after search. Perform one of the following pairing operations (what appear depends on the Bluetooth device pairing process). ] Check to be sure the passkey appears on the unit and Bluetooth device is the same. Appear in different combination (even if the device is the same) each time pairing is made. After pairing is successful, the unit will establish Bluetooth connection with the Bluetooth device*. Use <CONNECT PH/ CONNECT AU> (or activate <AUTO CNNCT>, page 18) to connect the same device from next time on. * Some devices may not be able to connect to the 4 Turn the control dial to select a device you want to delete, then press to confirm. 4 Turn the control dial to select a device you want to connect/disconnect, then press to confirm. Using a Bluetooth mobile phone Making a call ] Select a calling method or make a setting. (DIALED/ RECEIVED/ MISSED CALL/ PHONEBOOK/ DIAL NUMBER/ VOICE/ SETTINGS) If DIALED/ RECEIVED/ MISSED CALL/ PHONEBOOK is selected in step 2 . Using the remote controller 2 / 3 : [Press] Reverse skips or forward skips. Album name/performer = Track title = Current track number with the elapsed playing time = Current track number with the clock time = (back to the beginning) Repeat step 2 to select a setting item (see table below), then repeat the procedure to change the setting accordingly. BOOK WAIT Turn the control dial to select the device you want to delete, then press the control dial to confirm. You can copy the phonebook memory of a mobile phone into the unit (via OPP). You may need to enter the PIN code or verify passkey from the mobile phone to do pairing. You can change the PIN code of your choice before pairing (1-digit to 6-digit number). [ Initial: 0000 ] Turn the control dial to select a number, press 4 /¢ to move to the entry position, then press the control dial to confirm the entry. ON : The connection is established automatically with the registered Bluetooth device when you turn on the unit. *1 Will not display if two Bluetooth phones are connected at the same time. ⷠMake sure all important data has been backed up to avoid losing the data. ⷠIf the selected menu contains many tracks, you can fast search (±10, ±100, ±1 000) through the menu by turning the control dial quickly. [. . . ] / Check whether the connected USB device is compatible with this "NO USB" appears on the display. Connect the USB Bluetooth Adapter (KS-UBT1) to the unit before you can perform any operation. Make sure you have entered the same PIN code to both the unit and target device. / Move the car to a place where you can get a better signal reception. [. . . ]