User manual JVC CS-AR690

[. . . ] Music Power) : 50 W Impedance :4 K Frequency Response : 60 Hz ­ 20 kHz Sound Pressure Level : 84 dB/W 0 m Mass : 409 g (one piece) Designs and specifications are subject to change without notice. (600Hz) Fo (Res Freq ) Zo (Zmax at Fo) Sd (Piston Area) BL (Flux*Length) Qms (Mech Q) Qes (Elec Q) Qts (Total Q) Vas (Acous Vol) Le (Inductance) Cms (Compliance) Mms (Total Mass) Mmd (DiaphmMass) 2. 9 4 130. 7 25. 1 0. 0032 4. 28 3. 930 0. 744 0. 625 0. 52 0. 0618 357. 6 4. 15 4. 04 Ohms Ohms Hz Ohm sqM TM INSTRUCTIONS EN 2006 Victor Company of Japan, Limited LVT1406-002A [E] 0606SKMSANTCN Litr mH uM/N Gram Gram Mounting the speaker Professional knowledge is required for mounting this speaker. [. . . ] (600Hz) Fo (Res Freq ) Zo (Zmax at Fo) Sd (Piston Area) BL (Flux*Length) Qms (Mech Q) Qes (Elec Q) Qts (Total Q) Vas (Acous Vol) Le (Inductance) Cms (Compliance) Mms (Total Mass) Mmd (DiaphmMass) 2. 9 4 130. 7 25. 1 0. 0032 4. 28 3. 930 0. 744 0. 625 0. 52 0. 0618 357. 6 4. 15 4. 04 Ohms Ohms Hz Ohm sqM TM INSTRUCTIONS EN 2006 Victor Company of Japan, Limited LVT1406-002A [E] 0606SKMSANTCN Litr mH uM/N Gram Gram Mounting the speaker Professional knowledge is required for mounting this speaker. Make use of the paper pattern provided when processing the mounting board of the speaker. During mounting, ensure that there is enough spacing to avoid hitting against any parts such as window glass. In addition, mount the speaker such that the terminals are at the bottom. Notes for dealers Upon completing the mounting, please hand this instruction manual to the customer. Dimensions 70. 7 0 10 4. 5 Unit: mm 0 10 70. 7 483 4. 5 83 HO LE S 8. 1 47. 5 58 77. 8 Information for Users on Disposal of Old Equipment This symbol indicates that the product with this symbol should not be disposed as general household waste at its end-of-life. If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country and municipality. The amplifier and speakers should be connected between corresponding terminals, i. e. "left" to "left", and "right" to "right", as well as "+" to "+", and "­" to "­". Connection with reversed polarity will degrade the quality of stereo reproduction. Make sure that the output impedance of the amplifier's speaker terminal is rated at 4 ohms. When cleaning the speakers, use a soft cloth and wipe the surface gently. Do not apply thinner or solvent. Dear customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. [. . . ] Make sure that the output impedance of the amplifier's speaker terminal is rated at 4 ohms. When cleaning the speakers, use a soft cloth and wipe the surface gently. [. . . ]