User manual JVC CS-AR680

[. . . ] If you wish to dispose of this product and the battery, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead. Digital devices (CD/USB) produce very little noise compared with other sources. [. . . ] ⷠConnecting condition may vary depending on the circumstances around you. ⷠIf you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a phone call conversation, the Bluetooth connection is disconnected. ⷠIf you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www. When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. ⷠOnce the connection is established, it is registered in the unit even if you reset the unit. ⷠA maximum of two devices for Bluetooth phone and one for Bluetooth audio can be connected at a time. You can change the PIN code of your choice Or USB cable from the rear of the unit Use the Bluetooth device to search and select "JVC Unit. " · For some Bluetooth devices, you may need to enter the PIN code first after search. Perform one of the following pairing operations (what appear depends on the Bluetooth device pairing process). ] Check to be sure the passkey appears on the unit and Bluetooth device is the same. Appear in different combination (even if the device is the same) each time pairing is made. When a call comes in, the source is automatically changed to "BT FRONT/ BT REAR. ⷠTurn the control dial to adjust the phone volume level [ 00 ­ 50 ]. [ Initial: VOL 15 ] The adjustment made will not affect the other sources. When a text message comes in, the unit rings if your mobile phone is compatible with text message and "Message Notice" is set to "On. Using a Bluetooth audio player " If playback does not start automatically, operate the Bluetooth audio player to start playback. Repeat Track : Repeats current track All : Repeats all tracks Group : Repeats all tracks of the current group Random All : Randomly plays all tracks Group : Randomly plays all tracks of the current group To cancel repeat play or random play, select "Off. Using the remote controller 2 / 3 : [Press] Reverse skips or forward skips. Repeat step 2 to select a setting item (see table on page 18), then repeat the procedure to change the setting accordingly. Delete Pairing Phonebook Trans Turn the control dial to select the device you want to delete, then press the control dial to confirm. (page 14) You can copy the phonebook memory of a mobile phone into the unit (via OPP). You may need to enter the PIN code or verify passkey from the mobile phone to do pairing. [. . . ] General Sound is sometimes interrupted while listening to an external component connected to the auxiliary input jack. (page 25) Check to be sure the recommended stereo mini plug is used for connection. The correct characters are not displayed This unit can only display letters (capital: A ­ Z, small: a ­ z), (e. Insert a finalized CD-R/CD-RW (finalize with the component which you used for recording). [. . . ]