User manual JVC CA-MXS5RMD

[. . . ] COMPACT COMPONENT MD SYSTEM CA-MXS5RMD COMPACT DIGITAL AUDIO INSTRUCTIONS For Customer Use: Enter below the Model No. Serial No. LVT0354-001A [B] Warnings, Cautions and Others IMPORTANT for the U. K. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] Total playing time If you try to program a 33rd step "MD PROGRAM FULL" will appear in the main display. If your entry is ignored You have tried to program a track that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks). When selecting track 5 · If the selected track has a title, it will be shown at the center portion of the main display. (If the title is long and cannot be shown at a time, the unit scrolls the title to show the entire title. ) If the total playing time exceed 150 minutes The playing time will not be shown. ("­ ­ ­ : ­ ­" will appear. ) 4 Repeat step 3 to program other tracks you want. 5 Press MD # / 8. The tracks are played in the order you have programed. ­ 30 ­ Playing at Random -- Random Play The tracks of the loaded MD will play at random. Repeating Tracks -- Repeat Play You can have all the tracks, the program or the individual track currently playing repeat as many times as you like. On the remote control ONLY: To repeat play, press REPEAT during or before playing. Each time you press the button, Repeat play mode changes and appears in the main display as follows: REPEAT 1 REPEAT ALL REPEAT OFF (Canceled) 1 Load an MD. · If the current playing source is not the MD recorder, press MD # / 8, then 7 before going to the next step. 2 Press PLAY/REC MODE (or PLAY MODE on the remote control) repeatedly until "MD RANDOM" appears in the main display. · Each time you press the button, play mode changes as follows: Program play Random play (MD PROGRAM) (MD RANDOM) Normal play (MD NORMAL) Ex. When "REPEAT ALL" is selected 3 Press MD # / 8. The tracks are played at random. To skip the playing track, push the joy control rightward (¢ ) or press ¢ on the remote control. · You cannot go back to the previous tracks by pushing the joy control leftward (4 ) or pressing 4 on the remote control. To exit from Random play mode, press PLAY/REC MODE (or PLAY MODE on the remote control) once or twice, before or after play, so that the unit enters another playback mode (Normal play or Program play mode). · Pressing one of the number buttons will start Normal play from the selected track. REPEAT ALL: Repeats all the tracks in the MD (in Normal play or Random play mode), or all the tracks in the program. REPEAT OFF: Cancels the repeat play. Prohibiting Disc Ejection -- Disc Lock You can prohibit CD and MD ejection from the unit and can lock discs. On the unit ONLY: To prohibit disc ejection, press 0 for the CD 1 tray while holding 7 with the unit set in standby mode. "LOCKED" appears for a while, and the loaded discs (both CDs and MD) are locked. If you try to eject the locked discs "LOCKED" appears to inform you that the Disc Lock is in use. To cancel the prohibition and unlock the discs, press 0 for the CD 1 tray while holding 7 with the unit set in standby mode. "UNLOCKED" appears for a while, and the loaded discs (both CDs and MD) are unlocked. ­ 31 ­ Recording on MDs Front panel Continued The buttons and controls enlarged in the illustration below are used and explained in this section (pages 33 to 37). Remote control ­ 32 ­ Before You Start Recording · It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic embodied therein. · The sampling frequency rate converter built in the MD recorder allows you to record a digital source if its sampling frequency is 32 kHz, 44. 1 kHz, or 48 kHz. If no source equipment is connected to the AUX terminal or if the sampling frequency of the connected equipment is not 32 kHz, 44. 1 kHz, or 48 kHz, "AUX DIGITAL UNLOCK" appears in the main display (no recording is possible). · You cannot record the entire Dolby Digital, DTS Digital Surround, or MPEG Multichannel signals through the AUX terminal. · When you record onto partially recorded MD, its contents are not erased or overwritten. The recording starts from the point following the last recorded track of the MD. [. . . ] Cause There is a maximum number of tracks which can be recorded, regardless of recording time. · Repeating erasure and recording on the same MD creates many blank portions sparsely on the MD. When recording on such an MD, a track is recorded on these blank portions sparsely. If a track is divided and recorded into so many portions, "DISC FULL" appears. [. . . ]