User manual JVC AV-29BF10EPS

[. . . ] Ensure you select the correct voltage setting for your convenience. 2. Power Cord The power supply cord should be placed so that they are not likely to be walked on or pinched by items placed upon them or against them. Pay particular attention to cord where they enter the plug, power outlet, and the point where they exit from the receiver. Before Switching on your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Power connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press " " button to change balance leftward. ENGLISH - 5 - Setting Bass Level: Using " " or " " button select Bass. HUE adjust is functional only when NTSC 3. 58/4. 43 is applied in AV mode. It does not appear when other colour systems used. During the last minute of the count down, the timer is displayed on the upper right of the screen. When the timer reaches zero, TV goes to stand-by. Child Lock: " or " " button to select In Feature Menu, press " CHILD LOCK. Using " " or " " button turn CHILD LOCK On or Off. When Off is selected, there will be no difference in the operation of your TV. When On is selected, the TV can only be controlled by the remote control handset. In this case, the front panel buttons (except the Switch On/Off button) will not work. Mode: This option is used to change the picture size according to the coming transmission. If AUTO function is selected, then the picture size will be automatically changed according to the transmission. When you store the picture mode for a program other programs keep their picture mode setting unaffected. Language: Menu Language can be selected by pressing " " or " " button on LANGUAGE item. AV-2 Output: You can use this feature to select the internal or external source that will be output at AV-2 (EXT. II) terminal. TV or AV-1 can be chosen by pressing " " or " " button on "AV-2 OUTPUT". Feature Menu Press "MENU" button, now you are in main menu. If you know the channel number which you want to find, you can find the channel directly. Press " " or " " button to select CHANNEL, then press " " or " " button to select the channel number, or enter the number with the digit buttons. (Follow the step 5 to select the correct standard before you select a channel number. ) 4. If you want to name the new programme, follow the instructions under "To change the name of a programme" on page 8. If the sound or picture is abnormal, change the standard (broadcasting system) of new channel. Press " " or " " button to select STANDARD, then press " " or " " button to change the correct one. The indicated channel number will be changed when you change the standard. B/G : C02-C73 / S01-S41 / S75-S79 D/K : C01-C69 / S01-S41 K1 : C04-C09 6. Press " " or " " button to select FINE TUNING, then press " " or " " to fine-tune the channel. After the all settings are completed, store the new channel's setting to the programme number which you selected. Press " " or " " button to select STORE, then press " " or " " to store it. [. . . ] Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals. RGB mode If an equipment can output the RGB signals, connect it to the AV-1 (EXT. I) terminal. AV-2 S Mode If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better picture quality by selecting AV-2 S mode and connecting your equipment to the AV-2 S (EXT. II) terminal of TV. [. . . ]