User manual JVC A-X77

[. . . ] 9 AC Outlet INPUT 1 DVD/VCR OUT OUTPUT (AV OUT) Connect with your TV INPUT Cable or Satellite Box OUTPUT Video Audio (L) (R) - Audio - (L) Video (R) - Audio - (L) Video Audio (R) TV After connections, Power On. -1- Select Input "AV1" of your recorder. LVT1879-001A 0208SKMLGEEGL Initial Setup Wizard Press "STANDBY/ON" INSTRUCTIONS pg. [. . . ] 13 1 Select Language 2 Press "ENTER" 3 Set the "Date, Year and Time" 4 Moves the cursor to the previous or next column. Changes the setting at the current cursor position. Press "ENTER" Finish 5 -2- BASIC PLAYBACK DVD INSTRUCTIONS pg. 19 VHS Select "DVD" Select "VCR" 1 Start Playback 1 Start Playback 2 Stop Playback 2 Stop Playback 3 BASIC RECORDING Select "DVD or VCR" or 3 (One-Touch Recording) INSTRUCTIONS pg. 29 Playable Discs: DVD-Video, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM, CD-R, CD-RW, Video CD, Audio CD 1 Select Input (AV1, AV2 or DV IN) 4 5 Start Recording Stop Recording 2 Select Mode 3 DVD: XP, SP, LP or EP VCR: SP or SLP Note: To playback the recorded disc with other DVD players, it is necessary to finalize the disc. When your Cable/Satellite Box is powered on by the timer function, A-X77 is also powered on and starts to record (It takes about 1 seconds) automatically. When your Cable/Satellite Box is powered off using the timer function, A-X77 also stops recording (It takes about 3 seconds) and then powers off automatically. Timer-Link mode: Deactivate This operation makes "TimerLink" been off after finishing Timer-Link record. If you keep "Timer-Link" on, you don't need this step. -5- 7 Power On A-X77 Dubbing from VCR to DVD INSTRUCTIONS pg. 32 VHS Preparation : Press VCR button to set the VCR mode. DVD You can copy the contents of a VHS tape to a DVD using the DUBBING button. [. . . ] 32 VHS Preparation : Press VCR button to set the VCR mode. DVD You can copy the contents of a VHS tape to a DVD using the DUBBING button. [. . . ]