User manual JURA IMPRESSA X7

[. . . ] 62565 ­ 10/04 Nur für UL-geprüfte Geräte gültig ­ Valable seulement pour certificées machines UL ­ Valide solo per apparecchi sottoposti a controlli UL ­ Only valid for UL-approved machines / Sólo válido para aparatos clasificados como UL ­ Alleen voor UL-gekeurde apparaten geldig. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/ or injury to persons, including the following: Read all instructions. To protect against fire, electric shock and personal injury do not immerse cord, plugs, or appliance in water or other liquid. Close supervision is necessary when any appliance is used by or near children. Allow to cool before putting on or taking off parts, and before cleaning the appliance. [. . . ] The pre-brew system (I. P. B. A. S©) moisturises the coffee powder, briefly interrupts the discharge and then starts the actual brewing procedure. You can interrupt the draw-off prematurely by pressing any of the coffee draw-off buttons. In order to obtain outstanding froth, you can adapt the coffee spout (4) individually to match the size of your cups. 10. 2 Drawing off cappuccino : SELECT PRODUCT Put milk / Tetra Pak into a jug and immerse the cappuccino tube into the milk. You can interrupt the milk froth and the coffee prematurely by pressing the draw-off key once more. The rinsing is announced in advance by an acoustic signal. 10. 3 Drawing off pots of coffee : SELECT PRODUCT Place 1 pot under the coffee spout (4) and press the draw-off key (pot of coffee). You can interrupt the draw-off prematurely at any time by pressing the draw-off key again. 9. Installing the CLARIS plus filter cartridge If the CLARIS plus filter cartridge is installed properly you don't have to de-scale your machine anymore. For more information on the CLARIS plus filter cartridge refer to the brochure "CLARIS plus. Drawing off hot water : SELECT PRODUCT Place a cup under the pivoting nozzle (18) and press the drawoff key . : PORTION HOT WATER The draw-off of the programme portion of hot water stops automatically. You can interrupt the draw-off prematurely at any time by pressing the draw-off key again. Avoid direct contact with the skin. 15. 1 Programming grinding amount Switch your machine on the with ON/OFF operating switch. : ADJUST COFFEE QUANTITY / SELECT PRODUCT Press the required draw-off key. + By pressing the key + or - you can determine the amount to be ground. : (selected product) : 100% : 0% You can determine the allocation of the grinder "left" or "right". : ADJUST COFFEE QUANTITY / SELECT PRODUCT Press the required draw-off key, the key + in order to reach the next phase or the key EXIT to quit the programming. 12. Drawing off steam : SELECT PRODUCT Place a cup with the liquid to be heated under the pivoting nozzle (18) and press the draw-off key . Avoid direct contact with the skin. E 15. 2 Programming Temperature : ADJUST TEMPERATURE / SELECT PRODUCT Press the required draw-off key. Select the required temperature with the keys + or - (high or standart) To store, press the key PROG. : ADJUST TEMPERATURE / SELECT PRODUCT Press the required draw-off key, the key + in order to reach the next phase or the key EXIT to quit the programming. 13. Drawing-off milk froth : SELECT PRODUCT Pour milk / Tetra Pak into a jug and immerse the cappuccino tube into the milk. You can interrupt the draw-off prematurely at any time by pressing the draw-off key again. [. . . ] Once the descaling process has started, it must not be interrupted If you use descaling agents containing acid, remove any splashes and drips on sensitive surfaces, in particular natural stone and wood surfaces, straight away or take corresponding safety precautions. : EMPTY DRIP TRAY : INSERT AGENT IN TANK / PRESS DECALCIFYING Dissolve 3 tablets completely in 0. 7 litres of water in a vessel and pour the mixture into the empty water tank. Place two sufficiently large vessels under the pivoting nozzle (18) and the coffee spout. Press the key : UNIT DECALCIFYING / PLEASE WAIT An acoustic signal is heard : EMPTY DRIP TRAY : FILL WATER TANK Place a vessel under the pivoting nozzle (18) and the coffee spout (4). [. . . ]