User manual JURA IMPRESSA UHR F5

[. . . ] Further information on this subject can be found under "Cleaning the Easy Cappuccino Frother". Using and activating filter Your IMPRESSA no longer has to be de-scaled if you are using CLARIS plus filter cartridges. o Perform the "Using filter" operation without a break. This will ensure that your IMPRESSA always produces its best. 3 IMPRESSA UHR F5 ­ Quick Reference Guide l Remove the packaging on the CLARIS plus filter cartridge. l Lift the cartridge holder and insert the filter cartridge into the water tank, applying a light pressure. l Close the cartridge holder. l Fill the water tank with cold, fresh tap water and reinsert. o After two months, the filter will cease to work. [. . . ] n l Hold down the Filter button until the Filter indicator n lights up. ä l Turn the Rotary Switch until the 3 light segments around the Rotary Switch lights up. o When the 3 light segments light up, the filter is activated. If none of the light segments light up, this means that the filter has not been activated. m l Press the Rotary Switch to confirm the setting. The light segment by the switch will now flash. l Place a receptacle (containing at least 500 ml) under the Easy Cappuccino Frother. l If the milk pipe is connected, remove it. 4 IMPRESSA UHR F5 ­ Quick Reference Guide r l Turn the switch in the anticlockwise direction. Rinsing of the filter will now begin. The filter is now activated. Changing the filter o After 50 litres of water have been dispensed, the filter will cease to work. Monitor the elapsed time as shown on the date plate on the cartridge holder. o If the CLARIS plus filter cartridge is not activated, you will not be prompted to change the filter. Precondition: the Maintenance indicator and the Filter indicator n are illuminated. l Insert the new CLARIS plus filter cartridge into the water tank, pressing it lightly. l Close the cartridge holder. It will lock into place audibly. l Fill the water tank with cold, fresh tap water and reinsert. 5 IMPRESSA UHR F5 ­ Quick Reference Guide l Place a receptacle (containing at least 500 ml) under the Easy Cappuccino Frother. l If the milk pipe is connected, remove it. n l Hold down the Filter button until the Filter indicator n flashes. The light segment by the switch will now flash. r l Turn the switch in the anticlockwise direction. Rinsing of the filter will now begin. The Maintenance symbol h flashes, the IMPRESSA heats up and is once again ready for use. Cleaning the machine After dispensing 200 cups of coffee or performing 80 switch-on rinses, the IMPRESSA will prompt you to clean it. The light segment by the switch lights up during the descaling operation. The operation stops automatically, and the light segment by the switch flashes. After a few minutes, the coffee grounds container indicator x flashes. l Insert the empty drip tray and coffee grounds container back in the machine. l Rinse the water tank thoroughly and fill it with cold, fresh tap water. The light segment by the switch will now flash. t 9 IMPRESSA UHR F5 ­ Quick Reference Guide r l Turn the switch in the anticlockwise direction. This causes water to flow out of the Connector System©. The operation stops automatically, and the light segment by the switch flashes. After a few minutes, the coffee grounds container indicator x flashes. l Insert the empty drip tray and coffee grounds container back in the machine. The Maintenance symbol h flashes, the IMPRESSA heats up and is once again ready for use. t o If the descaling operation stops unexpectedly, rinse the water tank thoroughly. Rinsing the Easy Cappuccino Frother To ensure that the Easy Cappuccino Frother works perfectly, you should rinse it with water whenever you have prepared some milk. o The IMPRESSA will not prompt you to rinse the Easy Cappuccino Frother. l Carefully remove the Easy Cappuccino Frother from the Connector System©. l Reassemble the Easy Cappuccino Frother and attach it to the Connector System©. 10 IMPRESSA UHR F5 ­ Quick Reference Guide Cleaning the Easy Cappuccino Frother To ensure that the Easy Cappuccino Frother works perfectly, you should clean it daily when you have been preparing milk. o The IMPRESSA will not prompt you to clean the Easy Cappuccino Frother. o Your dealer will stock the JURA Auto-Cappuccino Cleaner. [. . . ] l Reassemble the Easy Cappuccino Frother and attach it to the Connector System©. 10 IMPRESSA UHR F5 ­ Quick Reference Guide Cleaning the Easy Cappuccino Frother To ensure that the Easy Cappuccino Frother works perfectly, you should clean it daily when you have been preparing milk. o The IMPRESSA will not prompt you to clean the Easy Cappuccino Frother. o Your dealer will stock the JURA Auto-Cappuccino Cleaner. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water. l Use only original JURA care products. Precondition: your IMPRESSA is ready for use. l Pour 250 ml of fresh water into a container and add one capful (max. [. . . ]