User manual JURA IMPRESSA E85

[. . . ] 64286 7/05 JURA IMPRESSA E80/85 Legend: DISPLAY: serves as information. JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www. jura. com = Note = Important = Tip Fig. Power Switch 20 22 21 21 Contents JURA IMPRESSA E80/85 1. Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1. 1 Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1. 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2. [. . . ] For example: 200 ML WATER If the required water quantity is reached, the following message is displayed: SHUT TAP Close the steam / hot water draw-off tap (15). Drawing off steam To ensure perfect operation, clean the 2-stage frothing jet (16) regularly. Hold the jet at the top and at the bottom end and screw it apart (Fig. If the nozzle is clogged with dried milk or has not been attached properly, it might suddenly come off during operation. Do not replace the replaceable steam/hot water jet (16) directly after drawing off steam, because the jet is hot after the draw-off operation. Steam can be used for heating liquids and frothing milk for cappuccino. Make sure that the replaceable steam/frothing jet (16) is pushed upwards when liquids are heated. To froth liquids, push the 2-stage frothing jet downwards, turning it slightly. During frothing some water will escape the system before the actual frothing process. At the start of the steam draw-off operation there can be splashing The steam jet becomes hot. READY Place a cup under the 2-stage frothing jet (16) and immerse it in the milk to be frothed or the liquid to be heated. Press the steam pre-selection key (7). HEATING STEAM To draw off steam, open the steam/hot water draw-off tap (15) (Fig. You can adjust the steam draw-off time individually by turning the Rotary Switch (1) until the required SEC are displayed. For example, 35 SEC If you do not change the steam draw-off time settings using the Rotary Switch (1), the machine will use the settings last adjusted During the steam draw-off operation, the message STEAM is displayed When the steam quantity is reached, the message SHUT TAP is displayed Close the steam / hot water draw-off tap (15). within this period you can draw off steam, stop the operation and activate it again without having to heat the machine up again. When the time has expired, press the steam pre-selection key (7) again. E 13. Drawing off steam using the Professional Cappuccino Frother (option) The Professional Cappuccino Frother is optionally available. Contact your authorized dealer. 13 13. 1 Connecting the Professional Cappuccino Frother to your IMPRESSA E80/85 Disassemble the replaceable hot water jet (Fig. 10) The optionally available milk container can be used for sucking in milk. 8). 13. 3 Cleaning the Professional Cappuccino Frother The Professional Cappuccino Frother must be cleaned after each draw-off operation. If necessary, disassemble the Professional Cappuccino Frother and thoroughly rinse the flow regulation with water (Fig. 17) For proper cleaning, use the JURA Auto Cappuccino Cleaning Agent This is available at your authorized dealer. [. . . ] Install it again. 20 OPEN TAP Open the steam / hot water draw-off valve (15) (Fig. 13) DECAL ON SHUT TAP After you have closed the steam / hot water draw off tap (15), the following message is displayed DECAL ON EMPTY DRAWER Empty the drawer DRAWER MISSING Insert the drawer again. RINSE READY The de-scaling operation was completed successfully. 18. 1 De-scaling the IMPRESSA E80/85 without display request Press the maintenance key (9) until RINSE is displayed Turn the Rotary Switch (1) until DECAL ON is displayed Press the Rotary Switch (1) Now, the "De-scaling" program is activated. Disposal Please return the IMPRESSA E80/85 machine to your local dealer, the service shop or to JURA for proper disposal. 20. [. . . ]