User manual JONSERED 54 MULCH

[. . . ] Install high lift blades with stamped "GRASS SIDE" facing down towards grass. IMPORTANT: To ensure proper assembly, center hole (2) in blade must align with star pattern (2) on mandrel assembly. [. . . ] Check to be sure mower opening is completely covered by the mulch cover. Raise and hold shield when attaching mulch cover and allow it to rest on cover while in operation. Your mower is now ready for discharging or installation of optional grass catcher accessory. The special mulch blades will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. also , the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades. wet grass tends to form clumps and interferes with the mulching action. At this time the grass has dried and the newly cut area will not be exposed to the direct sun. for best results , adjust the mower cutting height so that the mower cuts off only the top one-third of the grass blades. For extremely heavy mulching, reduce your width of cut and mow slowly. [. . . ] Lyft gräsklipparen till det högsta läget för att få åtkomst till bladn. Klipp gräset från norr till syd en gång i veckan och ändra sedan veckan efter till att klippa från öst till vast. [. . . ]