User manual JOHN LEWIS JLDWW905

[. . . ] JLDWW 905 compact dishwasher Instruction manual Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of your safety. You MUST read them carefully before installing or using the appliance. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance Installation q q Child safety q q This appliance is heavy. [. . . ] Press function button 1, the indicator lights of function buttons 2 and 3 turn off while the indicator light of function button 1 goes on flashing, the digital display indicates the current level. Examples: if the current level is 5, by pressing function button 1 once, level 6 is selected. if the current level is 10, by pressing function button 1 once, level 1 is selected. To memorise the operation, switch off the dishwasher by pressing the On/Off button. Using the funnel provided, pour in the salt until the container is full. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. Replace the cap tightly turning it clockwise until it stops with a click. The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished. The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then it will take longer. The function of the machine is not affected. Do not worry if water over flows from the unit when filling with salt, this is quite normal. Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Adjusting the dose According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage). Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades. Filling with rinse aid 1. The maximum level for filling is indicated by "max". Top up the rinse aid when the indicator light on the control panel illuminates. Ensure that the lid is closed after every refill. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash. Only use branded rinse aid for dishwashers, available also from your local John Lewis store. dishwasher cleaning agent, liquid detergent). This would damage the appliance. 14 Using the Dishwasher q Check if it's necessary to refill with dishwasher salt or rinse aid Load cutlery and dishes into the dishwasher. Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. q q q q q Before loading the dishes, you should: Remove all left over food and debris. Soften remnants of burnt food in pans When loading the dishes and cutlery, please note: - Dishes and cutlery must not impede the rotation of the spray arms . with the opening downwards so that water cannot collect in the container or a deep base. - Dishes and items of cutlery must not lie inside one another, or cover each other. Plastic items and pans with teflon have a tendency to retain water drops; these items will not dry as well as porcelain and steel items. q q Beware: Some cutlery / dishes are not suitable or of limited suitability to be washed in dishwashers' not suitable: - Cutlery with wooden, bone, china or mother-of-pearl handles - Plastic items that are not heat resistant - Older cutlery with glued parts that is not temperature resistant - Bonded cutlery items or dishes - Pewter or copper items - Lead crystal glass - Steel items prone to rusting - Wooden platters - Items made from synthetic fibres of limited suitability: - Only wash stoneware in the dishwasher if it is specifically marked as being dishwasher-safe by the manufacturer. - Glazed patterns may fade if machine washed frequently - Silver and aluminium parts have a tendency to discolour during washing. egg white, egg yolk and mustard often cause discolouring and staining on silver. [. . . ] Turn the water tap on. Solutions The machine does not fill with water. Clean the filter in the threaded hose fitting. Check the water inlet hose connection. Close the water tap and contact our extended warranty administrators, refer to Repairs - After Sales Service on page 25. - in the digital display appears The sink spigot is blocked. The water drain hose has not been correctly laid or it is bent or squashed. in the digital display appears Once the checks have been carried out, close the door and press the button of the programme that was running before the intervention of the alarm. The programme will continue from the point at which it was interrupted. [. . . ]