User manual JETWAY 2USER-QIG-MINIQ-R1.1

[. . . ] Two users operate simultaneously with single system and share the same processor, system memory, and so on through MagicTwin. No network administrator is needed as everything to network the two workstations is done automatically with the MagicTwin software. You need less software installation, service, maintenance and administration, which is the most expensive factor in computing. Time-slicing / Multiplexing Technology for Simplicity and Efficiency No obvious delay because of the Time-slicing/Multiplexing technology built-in. [. . . ] Next Page This key will bring you to the next Internet pages accessed before. Previous Page This key will bring you back to the previous pages accessed before. Track Ball This track ball built-in let you move the cursor around just by rolling the ball. You can drag the cursor or selected area by pressing and holding the track ball down in position. Play / Pause Start to play CD title, continue playing the tile, or pause the current play status. 3 Stop Stop playing and return to the beginning position of the track. Next track Skip the current track and go to the beginning position of the next track. If the current track is the last track, this button will lead you to the first track. Previous track Skip the current track and go to the beginning position of the previous track. If the current track the is first track, this button will lead you to the last track. Volume down Decrease the main volume of the sound. LCM Display There are two type of front panels. The LCM screen provides you with the system health information (CPU temperature, system temperature, and CPU fan speed), time, power indication, HDD activity, LAN activity, and optical device activity in graphic. The temperature () and fan speed (rpm) displayed are real-time fetched from the system through I²C bus. The information is intended to provide you with the up-to-date system health for your easy monitoring of system status. Setting the LCM Display Right LCM Adjust Button Left LCM Adjust Button Upon power-on the system LCM display will come up with a welcome message "Hello!" for three seconds. 4 The display will then resume to Always-on display mode. Under this mode you will see power indication, HDD activity, LAN activity, optical device activity, and time on screen. The LAN activity icon will blink when the network is accessed, The DISC activity icon will blink when the optical device is accessed. The HDD activity icon will blink when the hard disk is accessed. LAN Activity Display Optical Device Activity Display HDD Activity Display Right Button - select display mode clockwise, CPU TEMP SYS TEMP FAN rpm TIME Left Button - select display mode counter-clockwise, FAN rpm SYS TEMP CPU TEMP TIME CPU TEMP Mode SYS TEMP Mode CPU FAN rpm Mode The LCM display will resume to the always-on display after 1 minute of display of CPU temperature, SYS temperature and CPU FAN rpm mode. Clock Adjustment ­ press both left and right button simultaneously to enter into clock adjustment mode when in TIME mode. The time displayed is in 24-hour system as in "hh:mm" format. You will see "hh" blinking when entering the clock adjusting mode. You will be st switched to the "mm" minute time adjustment mode in the same time. Adjust and confirm the 1 nd digit and the 2 digit in turn the same way as above. When it is completed the screen will resume to always-on display mode. System Requirements and Recommendations We strongly urge that the following system requirements are met. You can purchase the dual head AGP VGA card separately from your dealer. 5 User Type Application Processor RAM VGA Port OS Standard User Power User Multimedia User Office, Internet, Email Database, DTP- and Sound, Movies/MPEGs SOHO Application Graphic ­Applications Graphic Applications max. [. . . ] Locate the cable clip on the outside on HDD bracket and clip the IDE cable onto it. Connect power cable to the device. Installing Expansion Card Remove the expansion card bracket on the back of the case by unscrewing the bracket holding plate on top of it. Plug in the expansion card vertically down firmly to its end position. Screw the bracket holding plate back to firmly to fix the expansion card bracket in position. Completing Installation Put back the top cover gently and tighten the thumbscrews to complete the installation. [. . . ]