User manual JETAUDIO IAUDIO M3

[. . . ] User's Guide 2 Copyright and Trademarks Copyright and Trademarks · iAUDIO is a registered trademark of Cowon Systems, Inc. · Microsoft, Windows, Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. · MMX and Pentium are trademarks or registered trademarks of Intel Corporation. · IBM and PC/AT are registered trademarks of International Business Machines Corporation. [. . . ] Selecting Station · When you press the FF/REW buttons while listening to FM radio, the frequency changes by 0. 1 MHz (or 0. 05 MHz). · When you press the FF or REW button for over 1 second, the nearest station with good reception is automatically searched. · When you press the PLAY button briefly while listening to FM radio, iAUDIO switches to Preset mode. The FM Radio Navigator window appears in which you can edit the preset channels. · Select a preset number in Navigator and press the MENU button. · You can save up to 24 preset channels. iAUDIO M3 Basic Operations FM Radio 23 4. Recording FM Radio · Press the REC button for a few seconds to record the FM broadcast while listening to it. · The file recorded in preset recording quality is saved as ENC***. MP3 in the RECORD folder (***: a 3-digit serial number). · Press the PLAY button to pause recording, and press it again to resume recording. "Wait" message appears while the file is saved, and iAUDIO returns to the Radio window when saving finishes. - For information on record quality settings, see the relevant page in this Guide. If the recorded file reaches this size, iAUDIO automatically saves it and then continues saving in a new recorded file. (Recording time for one file: Around 10 hours when the quality setting is 128Kbps) - When free space in HDD is less than 128MB, recording does not start. If free space becomes less than 128MB during recording, iAUDIO automatically stops. Press REC for a few moments. FM recording starts. Press REC button to finish recording. iAUDIO M3 24 Basic Operations Voice Recorder Voice Recorder (Recording Voice with Built-in Microphone) Select Voice Recorder Mode. Voice Recorder is in Stand By status. Press REC button. Voice Recording Starts. Press REC button to finish recording. 1. Preparing Voice Recording · Turn on iAUDIO, press the MODE button and select Voice Recorder. · iAUDIO enters Voice Recording Mode and stays in STAND BY status. 2. Voice Recording Start/Pause/Stop · In STAND BY status, press the REC button to start recording. · Press the PLAY button to pause recording, and press it again to resume recording. A "Wait" message appears while the file is being saved, and iAUDIO returns to STAND BY status when the saving finishes. · The recorded file is saved as VOC***. MP3 in the VOICE folder according to the preset recording quality (***: a 3-digit serial number). · You cannot turn off iAUDIO, nor change Menu or Mode while recording. 3. Playing Recorded file · To play the last recorded file, press the PLAY button in STAND BY status. [. . . ] When incorrect data is included in the CD database, the texts may appear abnormally on your PC. This is not an error of JetShell but the information stored in CD database. iAUDIO M3 Other Features 3. Editing ID3 Tag You can edit the ID3 tag of a MP3 file by selecting [Tools] ­ [Edit MP3 ID3 Tag] from the JetShell menu. 51 4. Changing MP3 Bitrate You can change the bitrate of MP3 files by selecting `MP3 Bitrate Conversion' from the menu. 5. [. . . ]