User manual JBSYSTEMS LIGHT STAGE PAINTER 12

[. . . ] Repairs carried out by unskilled people can lead to damage or use the same type spare parts. Installation The unit should be mounted via its metal hole on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a 10 times weight of the unit. 2. Always Do not touch any wire during operation as high voltage might be causing electric shock. Warning For power supply, do not connect in series much more than 10 units, use another mains supply for next 10 units. [. . . ] If you choose Maun, press the ENTER button to confirm, you can press DOWN and UP button to sensitively (1-100) of the unit. Back to the main functions without any change press the MENU button (or wait for 1 minute to exit menu mode). Black Out Press the MENU button up to when the Black Out is showing on the display. Use DOWN and UP button to select the yes (yes blackout) or no (no blackout) mode. Back to the main functions without any change press the MENU button (or wait for 1 minute to exit menu mode). Back Light Press the MENU button up to when the Back Light is showing on the display. Use DOWN and UP button to select the on (back light on) or off (back light off 1 minute after auto show) mode. Back to the main functions without any change press the MENU select Red or Green or Blue, press ENTER button to confirm and press DOWN and UP without any change press the MENU button or wait for 8 seconds. Slave Mode button to adjust the value, then press ENTER button to store. Back to the main functions Press the MENU button up to when the Slave Mode is showing on the display. Use DOWN and UP button to select the slave 1 or without any change press the MENU button (or wait for 1 minute to exit menu mode). Sound State Press the MENU button up to when the Sound State is showing on the display. Back to the main functions ENTER button and the display will blink. Use DOWN and UP button to select the on (sound control on) or off (sound control off) mode. Back to the main functions without any change press the MENU button (or wait for 1 minute to exit menu mode). Sound Sense R P L E 6- I IM A N Y R Auto Test Manual Test button (or wait for 1 minute to exit menu mode). Press the MENU button up to when the Auto Test is showing on the display. Press the MENU button up to when the Manual Test is showing on the display. Press ENTER button and Red 1 will blink, use UP and DOWN button to choose Green 1 or Blue 1 or Red2 or . . . or Blue 4 or Dimmer or Strobe, press ENTER button to enter, then press UP and Down button to adjust the value and press ENTER button to choose next optional. Back to the main functions without any change please press the MENU button. White Balance Press the MENU button up to when the White Balance is showing on the display. Press ENTER button and the r 255 will blink, press UP and Down button to adjust the value, press ENTER button to store and g 255 will blink on the display, press UP and Down button to adjust the value, press ENTER button to store and b 255 will blink on the display, press UP and Down button to adjust the value, and press ENTER button to store. [. . . ] Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit's optics. every 30/60 days. Clean the external optics at least every 20 days. If the DMX LED is on and no response to the channel, check the address settings and DMX polarity. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the unit or the previous one. [. . . ]